Danforth (Genuine) 90H galvanized anchor. Good condition, not painted. On a few small areas the galvanizing has worn. I bought it used in S. Florida as a hurricane mooring anchor after the hurricanes of 2004 (3 of them past my dock – see Sept 2005 Passagemaker Magazine for story) Next hurricane it was going to go in as a breast anchor to hold me off the dock – but we haven’t had a hurricane since! Specifically wanted the 90H (super strong anchor) and had a hard time finding it. Sold our DeFever 49 trawler so now need to sell the anchor. At Boater’s World lists it for $1261: http://www.boatersworld.com/product/MP81112619.htm?utm_medium=cpa <http://www.boatersworld.com/product/MP81112619.htm?utm_medium=cpa&utm_sourc e=Shopping> &utm_source=Shopping Price: $450. Located in Daytona Beach area of Florida (32169). Pick up only. Some of my other anchors I used on previous boats and/or as hurricane moorings off my dock: Bruce (Genuine) 20kg (44#) galvanized anchor -- $125 S.S. Plow anchor (original equipment on DeFever 49 RPH): $175 U.S. Anchor (Danforth style) 40# galvanized anchor – nice anchor is very good condition (only in the water two or three times-- $75 S.S. 50# Rock Pick disassemble anchor in storage bags, with both mud and rock (interchangeable) flukes. Disassembles into 5 pieces…..the shank, stock, crown (base), and set of flukes….with an additional pair of flukes (one set is rock, one set is mud [wider flukes]). Storage bags from acrylic material. Don’t think it has ever been in the water! -- $250 Northill S.S. foldable anchor (sea plane or PT boat style) -- $85. See full description here: http://anchors.synthasite.com/northill-anchor.php Also have 200’ of new New England brand Premium ¾-inch black three-strand nylon anchor line (never been wet) and 100’ of the same that was in the water once. West Marine page 227, item 357038 lists it at $2.19/ft. Will sell the 200’ rode for $250 and the 100’ rode for $120. Would make great deck lines also. Also have probably 200 – 250’ or more of 3/8-inch G4 (high test) chain taken off of our trawler. Some sections have the galvanizing worn off but overall, chain is in very serviceable condition. If interested email me and I will pull it out and measure how long and provide pictures. $1.25 a foot for the entire length….don’t want to cut into smaller lengths…all or nothing. Variety of anchoring related parts, i.e., shackles, thimbles, seizing wire, etc. If you come for an anchor remind me to show you what else I have. Email at scubeinc@bellsouth.net Everything listed is for pickup only in the Daytona Beach, Florida area