I need to have a Solartron 7081 calibrated - can anyone recommend someplace in the UK (or the EU)? Unfortunately Ametek no longer provide a calibration service for the meter.

On 26/09/2014 14:29, J May wrote: > I need to have a Solartron 7081 calibrated - can anyone recommend > someplace in the UK (or the EU)? > > Unfortunately Ametek no longer provide a calibration service for the > meter. > You could try testitnow.co.uk they are Transmille agents and have their own 8.5 digit meter. M K

On 26/09/2014 15:24, M K wrote: > On 26/09/2014 14:29, J May wrote: >> I need to have a Solartron 7081 calibrated - can anyone recommend >> someplace in the UK (or the EU)? >> >> Unfortunately Ametek no longer provide a calibration service for the >> meter. >> > You could try testitnow.co.uk they are Transmille agents and have their > own 8.5 digit meter. > > M K Thanks, I'll contact them on Monday.

I know Ametek stopped supporting the 7081 a few years ago but did offer support 'best efforts' along with calibration. I managed to have my two sent to Ametek most recently about 2 years ago. I'm a bit surprised that they no longer offer a 'calibration' service. I wonder why. Not wanting to get into all the 'meets performance and specifications' tests perhaps? Joe -----Original Message----- From: volt-nuts [mailto:volt-nuts-bounces@febo.com] On Behalf Of J May Sent: Friday, September 26, 2014 8:30 AM To: volt-nuts@febo.com Subject: [volt-nuts] Solartron 7081 Calibration I need to have a Solartron 7081 calibrated - can anyone recommend someplace in the UK (or the EU)? Unfortunately Ametek no longer provide a calibration service for the meter. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.

I wonder if Ametek can be persuaded to release any official calibration / performance testing procedures if they are no longer supporting the 7081. Does any one here have any contacts at Ametek? Todd Sent from my iPad > On Sep 28, 2014, at 12:14, J. L. Trantham <jltran@att.net> wrote: > > I know Ametek stopped supporting the 7081 a few years ago but did offer support 'best efforts' along with calibration. I managed to have my two sent to Ametek most recently about 2 years ago. > > I'm a bit surprised that they no longer offer a 'calibration' service. I wonder why. Not wanting to get into all the 'meets performance and specifications' tests perhaps? > > Joe > > -----Original Message----- > From: volt-nuts [mailto:volt-nuts-bounces@febo.com] On Behalf Of J May > Sent: Friday, September 26, 2014 8:30 AM > To: volt-nuts@febo.com > Subject: [volt-nuts] Solartron 7081 Calibration > > I need to have a Solartron 7081 calibrated - can anyone recommend someplace in the UK (or the EU)? > > Unfortunately Ametek no longer provide a calibration service for the meter. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

The calibration document is on my website <www.perdrix.co.uk>, the document itself is here: <http://www.perdrix.co.uk/Solartron7081/Solartron_7081_Test_Spec.pdf>. I think my contact at Ametek has retired. The source for the calibration software (that ran on Commodore PETs IIRC) may well not be available. Regards, David Partridge -----Original Message----- From: volt-nuts [mailto:volt-nuts-bounces@febo.com] On Behalf Of Todd Micallef Sent: 28 September 2014 18:35 To: Discussion of precise voltage measurement Subject: Re: [volt-nuts] Solartron 7081 Calibration I wonder if Ametek can be persuaded to release any official calibration / performance testing procedures if they are no longer supporting the 7081. Does any one here have any contacts at Ametek? Todd Sent from my iPad > On Sep 28, 2014, at 12:14, J. L. Trantham <jltran@att.net> wrote: > > I know Ametek stopped supporting the 7081 a few years ago but did offer support 'best efforts' along with calibration. I managed to have my two sent to Ametek most recently about 2 years ago. > > I'm a bit surprised that they no longer offer a 'calibration' service. I wonder why. Not wanting to get into all the 'meets performance and specifications' tests perhaps? > > Joe > > -----Original Message----- > From: volt-nuts [mailto:volt-nuts-bounces@febo.com] On Behalf Of J May > Sent: Friday, September 26, 2014 8:30 AM > To: volt-nuts@febo.com > Subject: [volt-nuts] Solartron 7081 Calibration > > I need to have a Solartron 7081 calibrated - can anyone recommend someplace in the UK (or the EU)? > > Unfortunately Ametek no longer provide a calibration service for the meter. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.