FE
Fabio Eboli
Sun, May 27, 2012 7:50 AM
Hello, I opened a keithley 2015, it contains a voltage reference
that resembles an LMx99, but is marked Linear Technology
and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
here a pic:
http://www.flickr.com/photos/14336723@N08/7277911474/
I measured +6,99... volts on the pin 1 vs pin 2.
Anyone has more info?
Does the 2001/2002 use the same reference?
Also I was warned to change the psu electrolytics, seem they
are prone to failure.
Fabio.
This message was sent using IMP, the Internet Messaging Program.
Hello, I opened a keithley 2015, it contains a voltage reference
that resembles an LMx99, but is marked Linear Technology
and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
here a pic:
http://www.flickr.com/photos/14336723@N08/7277911474/
I measured +6,99... volts on the pin 1 vs pin 2.
Anyone has more info?
Does the 2001/2002 use the same reference?
Also I was warned to change the psu electrolytics, seem they
are prone to failure.
Fabio.
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
AJ
Andreas Jahn
Sun, May 27, 2012 8:57 AM
Hello Fabio,
since National does not longer produce the LM399, LT is the only
manufacturer where you can get them.
In a german forum they state that the SL40057 IC-527 is used at least in a
keithley 2000 (6,5 Digit).
From my collected information of DMMs I know the following:
Keithley 2000, 2001 and 2010 use the LM399
Keithley 2002 uses the LTZ1000A
with best regards
Andreas
----- Original Message -----
From: "Fabio Eboli" fabioeb@quipo.it
To: volt-nuts@febo.com
Sent: Sunday, May 27, 2012 9:50 AM
Subject: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
Hello, I opened a keithley 2015, it contains a voltage reference
that resembles an LMx99, but is marked Linear Technology
and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
here a pic:
http://www.flickr.com/photos/14336723@N08/7277911474/
I measured +6,99... volts on the pin 1 vs pin 2.
Anyone has more info?
Does the 2001/2002 use the same reference?
Also I was warned to change the psu electrolytics, seem they
are prone to failure.
Fabio.
This message was sent using IMP, the Internet Messaging Program.
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
Hello Fabio,
since National does not longer produce the LM399, LT is the only
manufacturer where you can get them.
In a german forum they state that the SL40057 IC-527 is used at least in a
keithley 2000 (6,5 Digit).
>From my collected information of DMMs I know the following:
Keithley 2000, 2001 and 2010 use the LM399
Keithley 2002 uses the LTZ1000A
with best regards
Andreas
----- Original Message -----
From: "Fabio Eboli" <fabioeb@quipo.it>
To: <volt-nuts@febo.com>
Sent: Sunday, May 27, 2012 9:50 AM
Subject: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
> Hello, I opened a keithley 2015, it contains a voltage reference
> that resembles an LMx99, but is marked Linear Technology
> and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
> here a pic:
> http://www.flickr.com/photos/14336723@N08/7277911474/
> I measured +6,99... volts on the pin 1 vs pin 2.
>
> Anyone has more info?
>
> Does the 2001/2002 use the same reference?
>
> Also I was warned to change the psu electrolytics, seem they
> are prone to failure.
>
> Fabio.
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts@febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
FE
Fabio Eboli
Sun, May 27, 2012 10:38 AM
Hello Fabio,
since National does not longer produce the LM399, LT is the only
manufacturer where you can get them.
In a german forum they state that the SL40057 IC-527 is used at
least in a keithley 2000 (6,5 Digit).
From my collected information of DMMs I know the following:
Keithley 2000, 2001 and 2010 use the LM399
Keithley 2002 uses the LTZ1000A
with best regards
Andreas
This message was sent using IMP, the Internet Messaging Program.
Thank you very much Andreas for the info.
Fabio Eboli.
Andreas Jahn <Andreas_-_Jahn@t-online.de> ha scritto:
> Hello Fabio,
>
> since National does not longer produce the LM399, LT is the only
> manufacturer where you can get them.
> In a german forum they state that the SL40057 IC-527 is used at
> least in a keithley 2000 (6,5 Digit).
>
> From my collected information of DMMs I know the following:
> Keithley 2000, 2001 and 2010 use the LM399
> Keithley 2002 uses the LTZ1000A
>
> with best regards
>
> Andreas
>
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
MV
Mitch Van Ochten
Sun, May 27, 2012 12:39 PM
The Keithley 2002 Service Manual says it uses a "IC, ULTRA PRECISION REF,
LT21000A (PKG H8)".
Regards,
Mitch
----- Original Message -----
From: "Andreas Jahn" Andreas_-_Jahn@t-online.de
To: "Discussion of precise voltage measurement" volt-nuts@febo.com
Sent: Sunday, May 27, 2012 4:57 AM
Subject: Re: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
Hello Fabio,
since National does not longer produce the LM399, LT is the only
manufacturer where you can get them.
In a german forum they state that the SL40057 IC-527 is used at least in a
keithley 2000 (6,5 Digit).
From my collected information of DMMs I know the following:
Keithley 2000, 2001 and 2010 use the LM399
Keithley 2002 uses the LTZ1000A
with best regards
Andreas
----- Original Message -----
From: "Fabio Eboli" fabioeb@quipo.it
To: volt-nuts@febo.com
Sent: Sunday, May 27, 2012 9:50 AM
Subject: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
Hello, I opened a keithley 2015, it contains a voltage reference
that resembles an LMx99, but is marked Linear Technology
and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
here a pic:
http://www.flickr.com/photos/14336723@N08/7277911474/
I measured +6,99... volts on the pin 1 vs pin 2.
Anyone has more info?
Does the 2001/2002 use the same reference?
Also I was warned to change the psu electrolytics, seem they
are prone to failure.
Fabio.
This message was sent using IMP, the Internet Messaging Program.
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
The Keithley 2002 Service Manual says it uses a "IC, ULTRA PRECISION REF,
LT21000A (PKG H8)".
Regards,
Mitch
----- Original Message -----
From: "Andreas Jahn" <Andreas_-_Jahn@t-online.de>
To: "Discussion of precise voltage measurement" <volt-nuts@febo.com>
Sent: Sunday, May 27, 2012 4:57 AM
Subject: Re: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
> Hello Fabio,
>
> since National does not longer produce the LM399, LT is the only
> manufacturer where you can get them.
> In a german forum they state that the SL40057 IC-527 is used at least in a
> keithley 2000 (6,5 Digit).
>
> From my collected information of DMMs I know the following:
> Keithley 2000, 2001 and 2010 use the LM399
> Keithley 2002 uses the LTZ1000A
>
> with best regards
>
> Andreas
>
> ----- Original Message -----
> From: "Fabio Eboli" <fabioeb@quipo.it>
> To: <volt-nuts@febo.com>
> Sent: Sunday, May 27, 2012 9:50 AM
> Subject: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
>
>
>> Hello, I opened a keithley 2015, it contains a voltage reference
>> that resembles an LMx99, but is marked Linear Technology
>> and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
>> here a pic:
>> http://www.flickr.com/photos/14336723@N08/7277911474/
>> I measured +6,99... volts on the pin 1 vs pin 2.
>>
>> Anyone has more info?
>>
>> Does the 2001/2002 use the same reference?
>>
>> Also I was warned to change the psu electrolytics, seem they
>> are prone to failure.
>>
>> Fabio.
>>
>> ----------------------------------------------------------------
>> This message was sent using IMP, the Internet Messaging Program.
>>
>>
>>
>> _______________________________________________
>> volt-nuts mailing list -- volt-nuts@febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>> and follow the instructions there.
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts@febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
FE
Fabio Eboli
Sun, May 27, 2012 12:52 PM
The Keithley 2002 Service Manual says it uses a "IC, ULTRA PRECISION
REF, LT21000A (PKG H8)".
Regards,
Mitch
----- Original Message ----- From: "Andreas Jahn"
Andreas_-_Jahn@t-online.de
To: "Discussion of precise voltage measurement" volt-nuts@febo.com
Sent: Sunday, May 27, 2012 4:57 AM
Subject: Re: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
Hello Fabio,
since National does not longer produce the LM399, LT is the only
manufacturer where you can get them.
In a german forum they state that the SL40057 IC-527 is used at
least in a keithley 2000 (6,5 Digit).
From my collected information of DMMs I know the following:
Keithley 2000, 2001 and 2010 use the LM399
Keithley 2002 uses the LTZ1000A
with best regards
Andreas
----- Original Message ----- From: "Fabio Eboli" fabioeb@quipo.it
To: volt-nuts@febo.com
Sent: Sunday, May 27, 2012 9:50 AM
Subject: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
Hello, I opened a keithley 2015, it contains a voltage reference
that resembles an LMx99, but is marked Linear Technology
and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
here a pic:
http://www.flickr.com/photos/14336723@N08/7277911474/
I measured +6,99... volts on the pin 1 vs pin 2.
Anyone has more info?
Does the 2001/2002 use the same reference?
Also I was warned to change the psu electrolytics, seem they
are prone to failure.
Fabio.
This message was sent using IMP, the Internet Messaging Program.
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
This message was sent using IMP, the Internet Messaging Program.
A "Z" miswritten or misread that becomes a "2" ? :)
Fabio.
Mitch Van Ochten <mitch@vincentelectronics.com> ha scritto:
> The Keithley 2002 Service Manual says it uses a "IC, ULTRA PRECISION
> REF, LT21000A (PKG H8)".
>
>
> Regards,
>
> Mitch
>
>
> ----- Original Message ----- From: "Andreas Jahn"
> <Andreas_-_Jahn@t-online.de>
> To: "Discussion of precise voltage measurement" <volt-nuts@febo.com>
> Sent: Sunday, May 27, 2012 4:57 AM
> Subject: Re: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
>
>
>> Hello Fabio,
>>
>> since National does not longer produce the LM399, LT is the only
>> manufacturer where you can get them.
>> In a german forum they state that the SL40057 IC-527 is used at
>> least in a keithley 2000 (6,5 Digit).
>>
>> From my collected information of DMMs I know the following:
>> Keithley 2000, 2001 and 2010 use the LM399
>> Keithley 2002 uses the LTZ1000A
>>
>> with best regards
>>
>> Andreas
>>
>> ----- Original Message ----- From: "Fabio Eboli" <fabioeb@quipo.it>
>> To: <volt-nuts@febo.com>
>> Sent: Sunday, May 27, 2012 9:50 AM
>> Subject: [volt-nuts] keithley 2015 (2000) voltage reference SL40057
>>
>>
>>> Hello, I opened a keithley 2015, it contains a voltage reference
>>> that resembles an LMx99, but is marked Linear Technology
>>> and reports thes codes SL40057 IC-527 0430 the last seem a datecode.
>>> here a pic:
>>> http://www.flickr.com/photos/14336723@N08/7277911474/
>>> I measured +6,99... volts on the pin 1 vs pin 2.
>>>
>>> Anyone has more info?
>>>
>>> Does the 2001/2002 use the same reference?
>>>
>>> Also I was warned to change the psu electrolytics, seem they
>>> are prone to failure.
>>>
>>> Fabio.
>>>
>>> ----------------------------------------------------------------
>>> This message was sent using IMP, the Internet Messaging Program.
>>>
>>>
>>>
>>> _______________________________________________
>>> volt-nuts mailing list -- volt-nuts@febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>>> and follow the instructions there.
>>
>>
>> _______________________________________________
>> volt-nuts mailing list -- volt-nuts@febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>> and follow the instructions there.
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.