I have the GPIBKIT version of my HP3458A cal ram data dumper program available. If you want to try a copy shoot me an email. If it works out, I'll see if John wants to include it in the standard toolkit distribution. You will need to download GPIB tool kit from the KE5FX.COM web site, run the tool kit configuration program (PROLOGIX.EXE) to setup it up for your interface (it works with Prologix and NI compatible interfaces), copy my HP3458.EXE program to the GPIBKIT directory and run it. Check the comments at the start of HP3458.CPP for some info. Run HP3458.EXE without any command line arguments for program usage help.

Hi Mark, Is it possible the program could create a .bin or .hex file that could be used to burn a backup NVRAM on an external programmer? I would love to have a copy if possible. While I don't yet have a 3458A, it is on my wish list awaiting the necessary funds to build up and for that once in a while good deal. Regards, Tom ----- Original Message ----- From: "Mark Sims" <holrum@hotmail.com> To: <volt-nuts@febo.com> Sent: Thursday, August 21, 2014 9:33 PM Subject: [volt-nuts] HP3458A CAL ram data dumper program >I have the GPIBKIT version of my HP3458A cal ram data dumper program >available. If you want to try a copy shoot me an email. If it works >out, I'll see if John wants to include it in the standard toolkit >distribution. > You will need to download GPIB tool kit from the KE5FX.COM web site, run > the tool kit configuration program (PROLOGIX.EXE) to setup it up for your > interface (it works with Prologix and NI compatible interfaces), copy my > HP3458.EXE program to the GPIBKIT directory and run it. Check the > comments at the start of HP3458.CPP for some info. Run HP3458.EXE without > any command line arguments for program usage help. > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

On Thu, Aug 21, 2014 at 9:33 PM, Mark Sims <holrum@hotmail.com> wrote: > I have the GPIBKIT version of my HP3458A cal ram data dumper program > available. If you want to try a copy shoot me an email. If it works > out, I'll see if John wants to include it in the standard toolkit > distribution. > You will need to download GPIB tool kit from the KE5FX.COM web site, run > the tool kit configuration program (PROLOGIX.EXE) to setup it up for your > interface (it works with Prologix and NI compatible interfaces), copy my > HP3458.EXE program to the GPIBKIT directory and run it. Check the comments > at the start of HP3458.CPP for some info. Run HP3458.EXE without any > command line arguments for program usage help. > > Anybody, perchance, have any goodies like this that run on Unix or Linux? Mark

-------- In message <CABWWDmpaRBLWcBEGQpNsRK=eMJ9SbAqfiCTLescBLK-Y7PuPfQ@mail.gmail.com> , Mark Wendt writes: >On Thu, Aug 21, 2014 at 9:33 PM, Mark Sims <holrum@hotmail.com> wrote: > >> I have the GPIBKIT version of my HP3458A cal ram data dumper program >> available. If you want to try a copy shoot me an email. If it works >> out, I'll see if John wants to include it in the standard toolkit >> distribution. >> You will need to download GPIB tool kit from the KE5FX.COM web site, run >> the tool kit configuration program (PROLOGIX.EXE) to setup it up for your >> interface (it works with Prologix and NI compatible interfaces), copy my >> HP3458.EXE program to the GPIBKIT directory and run it. Check the comments >> at the start of HP3458.CPP for some info. Run HP3458.EXE without any >> command line arguments for program usage help. >> >> >Anybody, perchance, have any goodies like this that run on Unix or Linux? https://github.com/bsdphk/pylt -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 phk@FreeBSD.ORG | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence.

Mark, I too would like to try your HP3458A dump program. Anything that will save me some time is greatly appreciated. Nathan