I recently purchased a CLIP for the 3458A from Agilent and the schematic for
the A5 board that I have (single EPROM board, not SMT) was supplied in an 8
½ x 11 format and was unreadable.  I contacted Agilent and they have
provided me with a .TIF image of the schematic in normal size that I have
converted to a .PDF file.  I had it printed out today in full size and it is
perfectly readable.

If anyone needs this, let me know.  I can send you both files (.TIF and
.PDF) total of < 0.6 MB.

Joe

Joe,

I would appreciate a copy, either via mail attachment, or via upload through my manuals pages

http;//www.ko4bb.com/manuals

Thanks

Didier KO4BB

Sent from my BlackBerry Wireless thingy while I do other things...

-----Original Message-----
From: "J. L. Trantham" jltran@att.net
Sender: volt-nuts-bounces@febo.com
Date: Mon, 12 Dec 2011 22:25:56
To: 'Discussion of precise voltage measurement'volt-nuts@febo.com
Reply-To: Discussion of precise voltage measurement volt-nuts@febo.com
Subject: [volt-nuts] 3458A CLIP A5 Board 03458-66505 Rev C

I recently purchased a CLIP for the 3458A from Agilent and the schematic for
the A5 board that I have (single EPROM board, not SMT) was supplied in an 8
½ x 11 format and was unreadable.  I contacted Agilent and they have
provided me with a .TIF image of the schematic in normal size that I have
converted to a .PDF file.  I had it printed out today in full size and it is
perfectly readable.

If anyone needs this, let me know.  I can send you both files (.TIF and
.PDF) total of < 0.6 MB.

Joe

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.