RW
Richard W. Solomon
Sun, Mar 18, 2007 1:26 AM
Just a guess, but SPDT toggle switch ?
How much does he want for them ?
Regards, Dick, W1KSZ
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Joseph Gray
Sent: Saturday, March 17, 2007 9:15 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Coax switch
The local surplus guy got in a few dozen coax switches. The only markings on
them say "Type DSWA0". Dimensions are about 2.6" H x 2" D x 1" W. There is a
toggle switch on the front and three BNC connectors on the back.
I can't find any information about these. Does anyone know anything about
these?
Thanks.
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
Just a guess, but SPDT toggle switch ?
How much does he want for them ?
Regards, Dick, W1KSZ
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Joseph Gray
Sent: Saturday, March 17, 2007 9:15 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Coax switch
The local surplus guy got in a few dozen coax switches. The only markings on
them say "Type DSWA0". Dimensions are about 2.6" H x 2" D x 1" W. There is a
toggle switch on the front and three BNC connectors on the back.
I can't find any information about these. Does anyone know anything about
these?
Thanks.
_______________________________________________
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
JG
Joseph Gray
Sun, Mar 18, 2007 2:27 AM
Just a guess, but SPDT toggle switch ?
How much does he want for them ?
Regards, Dick, W1KSZ
I would assume so. I have one and will have to put a meter on it. I was
curious if anyone knew what frequency range these might be good for.
As for price, he said he would probably put them on ebay for $10 each. If
there is interest, I can see about arranging a group buy with him before he
puts them on ebay.
> Just a guess, but SPDT toggle switch ?
> How much does he want for them ?
>
> Regards, Dick, W1KSZ
I would assume so. I have one and will have to put a meter on it. I was
curious if anyone knew what frequency range these might be good for.
As for price, he said he would probably put them on ebay for $10 each. If
there is interest, I can see about arranging a group buy with him before he
puts them on ebay.
JG
Joseph Gray
Sun, Mar 18, 2007 2:34 AM
I just checked with a meter and they are DPDT. I read about 0.2 Ohms from
the center BNC when switched to each outer BNC.
----- Original Message -----
From: "Joseph Gray" jgray@zianet.com
To: "Discussion of precise time and frequency measurement"
time-nuts@febo.com
Sent: Saturday, March 17, 2007 8:27 PM
Subject: Re: [time-nuts] Coax switch
Just a guess, but SPDT toggle switch ?
How much does he want for them ?
Regards, Dick, W1KSZ
I would assume so. I have one and will have to put a meter on it. I was
curious if anyone knew what frequency range these might be good for.
As for price, he said he would probably put them on ebay for $10 each. If
there is interest, I can see about arranging a group buy with him before
he
puts them on ebay.
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
I just checked with a meter and they are DPDT. I read about 0.2 Ohms from
the center BNC when switched to each outer BNC.
----- Original Message -----
From: "Joseph Gray" <jgray@zianet.com>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Sent: Saturday, March 17, 2007 8:27 PM
Subject: Re: [time-nuts] Coax switch
>> Just a guess, but SPDT toggle switch ?
>> How much does he want for them ?
>>
>> Regards, Dick, W1KSZ
>
> I would assume so. I have one and will have to put a meter on it. I was
> curious if anyone knew what frequency range these might be good for.
>
> As for price, he said he would probably put them on ebay for $10 each. If
> there is interest, I can see about arranging a group buy with him before
> he
> puts them on ebay.
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts@febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
DJ
Didier Juges
Sun, Mar 18, 2007 2:47 AM
I assume these are signal switches, as opposed to power switches?
Didier
Joseph Gray wrote:
I just checked with a meter and they are DPDT. I read about 0.2 Ohms from
the center BNC when switched to each outer BNC.
----- Original Message -----
From: "Joseph Gray" jgray@zianet.com
To: "Discussion of precise time and frequency measurement"
time-nuts@febo.com
Sent: Saturday, March 17, 2007 8:27 PM
Subject: Re: [time-nuts] Coax switch
Just a guess, but SPDT toggle switch ?
How much does he want for them ?
Regards, Dick, W1KSZ
I would assume so. I have one and will have to put a meter on it. I was
curious if anyone knew what frequency range these might be good for.
As for price, he said he would probably put them on ebay for $10 each. If
there is interest, I can see about arranging a group buy with him before
he
puts them on ebay.
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
I assume these are *signal* switches, as opposed to *power* switches?
Didier
Joseph Gray wrote:
> I just checked with a meter and they are DPDT. I read about 0.2 Ohms from
> the center BNC when switched to each outer BNC.
>
> ----- Original Message -----
> From: "Joseph Gray" <jgray@zianet.com>
> To: "Discussion of precise time and frequency measurement"
> <time-nuts@febo.com>
> Sent: Saturday, March 17, 2007 8:27 PM
> Subject: Re: [time-nuts] Coax switch
>
>
>
>>> Just a guess, but SPDT toggle switch ?
>>> How much does he want for them ?
>>>
>>> Regards, Dick, W1KSZ
>>>
>> I would assume so. I have one and will have to put a meter on it. I was
>> curious if anyone knew what frequency range these might be good for.
>>
>> As for price, he said he would probably put them on ebay for $10 each. If
>> there is interest, I can see about arranging a group buy with him before
>> he
>> puts them on ebay.
>>
>>
>> _______________________________________________
>> time-nuts mailing list
>> time-nuts@febo.com
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>
>>
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts@febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>
JG
Joseph Gray
Sun, Mar 18, 2007 2:59 AM
I assume these are signal switches, as opposed to power switches?
Didier
Well, as I said, they have BNC connectors on them. Also, from the markings
on the panel they were mounted in, they were part of some type of telemetry
system.
I was going to try hooking the one I have up to a signal generator and
comparing the input/output at various frequencies (using my scope) to see if
there is any noticeable degradation. I don't have anything fancier to test
these with.
>I assume these are *signal* switches, as opposed to *power* switches?
>
> Didier
Well, as I said, they have BNC connectors on them. Also, from the markings
on the panel they were mounted in, they were part of some type of telemetry
system.
I was going to try hooking the one I have up to a signal generator and
comparing the input/output at various frequencies (using my scope) to see if
there is any noticeable degradation. I don't have anything fancier to test
these with.
RW
Richard W. Solomon
Sun, Mar 18, 2007 3:15 AM
DPDT ??
73, Dick, W1KSZ
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Joseph Gray
Sent: Saturday, March 17, 2007 10:34 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Coax switch
I just checked with a meter and they are DPDT. I read about 0.2 Ohms from
the center BNC when switched to each outer BNC.
----- Original Message -----
From: "Joseph Gray" jgray@zianet.com
To: "Discussion of precise time and frequency measurement"
time-nuts@febo.com
Sent: Saturday, March 17, 2007 8:27 PM
Subject: Re: [time-nuts] Coax switch
Just a guess, but SPDT toggle switch ?
How much does he want for them ?
Regards, Dick, W1KSZ
I would assume so. I have one and will have to put a meter on it. I was
curious if anyone knew what frequency range these might be good for.
As for price, he said he would probably put them on ebay for $10 each. If
there is interest, I can see about arranging a group buy with him before
he
puts them on ebay.
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
DPDT ??
73, Dick, W1KSZ
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Joseph Gray
Sent: Saturday, March 17, 2007 10:34 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Coax switch
I just checked with a meter and they are DPDT. I read about 0.2 Ohms from
the center BNC when switched to each outer BNC.
----- Original Message -----
From: "Joseph Gray" <jgray@zianet.com>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Sent: Saturday, March 17, 2007 8:27 PM
Subject: Re: [time-nuts] Coax switch
>> Just a guess, but SPDT toggle switch ?
>> How much does he want for them ?
>>
>> Regards, Dick, W1KSZ
>
> I would assume so. I have one and will have to put a meter on it. I was
> curious if anyone knew what frequency range these might be good for.
>
> As for price, he said he would probably put them on ebay for $10 each. If
> there is interest, I can see about arranging a group buy with him before
> he
> puts them on ebay.
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts@febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
_______________________________________________
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
JM
John Miles
Sun, Mar 18, 2007 3:17 AM
Dick: you got my message re: the TDS 544, right? (Apologies for the misuse
of bandwidth but I have had a lot of trouble emailing Earthlink users
lately, and wanted to make sure I got through.)
-- john, KE5FX
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Richard W. Solomon
Sent: Saturday, March 17, 2007 8:15 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Coax switch
DPDT ??
73, Dick, W1KSZ
Dick: you got my message re: the TDS 544, right? (Apologies for the misuse
of bandwidth but I have had a *lot* of trouble emailing Earthlink users
lately, and wanted to make sure I got through.)
-- john, KE5FX
> -----Original Message-----
> From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
> Behalf Of Richard W. Solomon
> Sent: Saturday, March 17, 2007 8:15 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Coax switch
>
>
> DPDT ??
>
> 73, Dick, W1KSZ
>
CV
Christian Vogel
Sun, Mar 18, 2007 9:34 AM
double pole, double throw, which could be drawn like this:
-----o
-----o ---- o ----- (pole 1)
-----o
-----o ---- o ----- (pole 2)
^
|
Two "throws" each.
Chris
Hi Richard,
> DPDT ??
>
double pole, double throw, which could be drawn like this:
-----o
-----o ---- o ----- (pole 1)
-----o
-----o ---- o ----- (pole 2)
^
|
Two "throws" each.
Chris
DJ
Didier Juges
Sun, Mar 18, 2007 11:04 AM
Interesting, I only have one problem with Earthlink users: absolutely
nothing gets through :-)
Didier
John Miles wrote:
Dick: you got my message re: the TDS 544, right? (Apologies for the misuse
of bandwidth but I have had a lot of trouble emailing Earthlink users
lately, and wanted to make sure I got through.)
-- john, KE5FX
Interesting, I only have *one* problem with Earthlink users: absolutely
nothing gets through :-)
Didier
John Miles wrote:
> Dick: you got my message re: the TDS 544, right? (Apologies for the misuse
> of bandwidth but I have had a *lot* of trouble emailing Earthlink users
> lately, and wanted to make sure I got through.)
>
> -- john, KE5FX
>
RW
Richard W. Solomon
Sun, Mar 18, 2007 12:54 PM
That's 6 BNC connectors, the switch has only three.
73, Dick, W1KSZ
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Christian Vogel
Sent: Sunday, March 18, 2007 5:35 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Coax switch
Hi Richard,
That's 6 BNC connectors, the switch has only three.
73, Dick, W1KSZ
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]On
Behalf Of Christian Vogel
Sent: Sunday, March 18, 2007 5:35 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Coax switch
Hi Richard,
> DPDT ??
>
double pole, double throw, which could be drawn like this:
-----o
-----o ---- o ----- (pole 1)
-----o
-----o ---- o ----- (pole 2)
^
|
Two "throws" each.
Chris
_______________________________________________
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
