Does anyone have a reccomendation for (relatively inexpensive) Kelvin Klips? (prefer <$50) I've been looking for a pair of Pomona 5940s, but havn't found any except new. I really don't need the ultimate, but would like a solidly built set, mainly for 4-terminal resistance measurements. There are plenty of Chinese ones on eBay, but I've really no idea which are good and which are trash. I am open to a lead set as well, perhaps 4 wire plus a shield/ground with loose bananna plugs on the meter end. Thanks, -John =============

I just got a pair of Muller BU-75K, they seem ok, but haven't really tested them out. Available at DigiKey, Mouser, ebay. Range from $8-$18 depending. Andy Bardagjy bardagjy.com On Aug 4, 2012, at 10:07 PM, J. Forster wrote: > Does anyone have a reccomendation for (relatively inexpensive) Kelvin > Klips? (prefer <$50) > > I've been looking for a pair of Pomona 5940s, but havn't found any except > new. > > I really don't need the ultimate, but would like a solidly built set, > mainly for 4-terminal resistance measurements. > > There are plenty of Chinese ones on eBay, but I've really no idea which > are good and which are trash. > > I am open to a lead set as well, perhaps 4 wire plus a shield/ground with > loose bananna plugs on the meter end. > > Thanks, > > -John > > ============= > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.