I have several sets of the Chinese ones from Ebay. They are actually pretty good. You can't beat them for the money. They do use a metal spring to close the clips, so if you are doing high freq LRC/AC type measurements, they are not quite as good as the ones that use rubber.

Hi, I took a punt on one of those kelvin clip sets of three on ebay, said copper clips, but I took one and filed on the back near the point where I would solder on the wire instead of screwing down, and the material was brass. M K > From: holrum@hotmail.com > To: volt-nuts@febo.com > Date: Sun, 5 Aug 2012 04:48:36 +0000 > Subject: [volt-nuts] Kelvin Klips > > > I have several sets of the Chinese ones from Ebay. They are actually pretty good. You can't beat them for the money. They do use a metal spring to close the clips, so if you are doing high freq LRC/AC type measurements, they are not quite as good as the ones that use rubber. > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.