Re: Restrictions on functions and modules or .other alternative
a few ";" are missing and you need concat():
polygon(concat(points1, points2));
The result is not yet correct, but this is a different problem.
Am Di., 29. März 2022 um 12:06 Uhr schrieb Jan Öhman via Discuss <
discuss@lists.openscad.org>:
---------- Forwarded message ----------
From: "Jan Öhman" jan_ohman@yahoo.com
To: OpenSCAD general discussion discuss@lists.openscad.org
Cc:
Bcc:
Date: Tue, 29 Mar 2022 10:00:25 +0000 (UTC)
Subject: [OpenSCAD] Re: Restrictions on functions and modules or .other
alternative
thank you!
this is exactly what I was looking for - almost ...
This program (at the bottom) Is a bit modified towards the presented
solution and creates two number series with coordinates.
But, how to combine several series? (this doesn't work)
points1 =
[[10, 10], [10, -0.0197717], [8.74419, 0.0592372], [7.50818, 0.295018],
[6.31148, 0.683852], [5.17294, 1.21961], [4.11053, 1.89383], [3.14099,
2.6959], [2.27963, 3.61316], [1.54003, 4.63114], [0.933839, 5.73379],
[0.470631, 6.90372], [0.157706, 8.12248], [0, 9.37085]]
points2 =
[[10, 50], [-0.0197717, 50], [0.0592372, 51.2558], [0.295018, 52.4918],
[0.683852, 53.6885], [1.21961, 54.8271], [1.89383, 55.8895], [2.6959,
56.859], [3.61316, 57.7204], [4.63114, 58.46], [5.73379, 59.0662],
[6.90372, 59.5294], [8.12248, 59.8423], [9.37085, 60]]
polygon(points1, points2);
This instructions works as desire .:
points =
[[10, -0.0197717], [8.74419, 0.0592372], [7.50818, 0.295018], [6.31148,
0.683852], [5.17294, 1.21961], [4.11053, 1.89383], [3.14099, 2.6959],
[2.27963, 3.61316], [1.54003, 4.63114], [0.933839, 5.73379], [0.470631,
6.90372], [0.157706, 8.12248], [0, 9.37085],
[-0.0197717, 50], [0.0592372, 51.2558], [0.295018, 52.4918],
[0.683852, 53.6885], [1.21961, 54.8271], [1.89383, 55.8895], [2.6959,
56.859], [3.61316, 57.7204], [4.63114, 58.46], [5.73379, 59.0662],
[6.90372, 59.5294], [8.12248, 59.8423], [9.37085, 60]];
polygon(points);
My program below
fn = 50;
radius1 = 10;
angles1 = [0, 90];
rotate1 = 1; // 1 medurs, -1 moturs
startAngel1 = "bottom";
x1 = 10;
y1 = 10;
// points1 = circSect();
points1 = circSect(x1, y1, radius1, angles1, startAngel1, rotate1, fn);
polygon(points1);
points2 = circSect(10, 50, 10, [0, 90], "left", 1, fn);
polygon(points2);
function circSect(x=0, y=0, radius=10, angles=[0,270], startRef="bottom",
rotate=1, fn=24) =
let(
startAngel = (startRef == "left") ? 0
: (startRef == "bottom") ? 90
: (startRef == "right") ? 180
: (startRef == "top") ? 270
: undef,
r = radius / cos(180 / fn),
step = 360 / fn,
points = [[x, y],
for(a = [angles[0]-startAngel : step : angles[1]-startAngel])
[-rotate * r * cos(a)+x, r * sin(a)+y]]
) points;
Den måndag 28 mars 2022 18:39:37 CEST, Jordan Brown <
openscad@jordan.maileater.net> skrev:
On 3/27/2022 5:23 PM, nop head wrote:
function sector(radius, angles, fn = 24) =
let(
r = radius / cos(180 / fn),
step = -360 / fn,
points = concat([[0, 0]],
[for(a = [angles[0] : step : angles[1] - 360])
[r * cos(a), r * sin(a)]
],
[[r * cos(angles[1]), r * sin(angles[1])]]
)
) points;
radius = 10;
angles = [0, 90];
echo(sector(radius, angles));
Simplifying a little - the concat isn't necessary; you can just directly
create the list:
function sector(radius, angles, fn = 24) =
let(
r = radius / cos(180 / fn),
step = -360 / fn,
points = [
[0, 0],
for(a = [angles[0] : step : angles[1] - 360])
[r * cos(a), r * sin(a)],
[r * cos(angles[1]), r * sin(angles[1])]
]
) points;
radius = 10;
angles = [0, 90];
echo(sector(radius, angles));
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
---------- Forwarded message ----------
From: "Jan Öhman via Discuss" discuss@lists.openscad.org
To: OpenSCAD general discussion discuss@lists.openscad.org
Cc: "Jan Öhman" jan_ohman@yahoo.com
Bcc:
Date: Tue, 29 Mar 2022 10:00:25 +0000 (UTC)
Subject: [OpenSCAD] Re: Restrictions on functions and modules or .other
alternative
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org