Thanks to all. Used Henry’s two loop method to success. We’ll see what happens in the morning. Looks like you just slide the loop off the mounts. Thx again Chas Current track: https://share.delorme.com/CharlesMcKeown Bahama boat trip 2014 Photo Blog: http://bevchasbahamas2014.blogspot.com/ Sent from my iPhone > On Aug 28, 2018, at 7:11 PM, Rich Gano <richgano@gmail.com> wrote: > > I have been looking to find an online manual, but have seen a few references to other Hurths which say it is OK. > > From: Chas [mailto:bevchasm@gmail.com] > Sent: Tuesday, August 28, 2018 6:34 PM > To: Rich Gano <richgano@gmail.com> > Cc: Trawlers-and-Trawlering <trawlers@lists.trawlering.com> > Subject: Re: Props spinning at anchor > > ZF Hurth Marine > Made in Italy > Model - ZF-80-1A Ratio - 2.5 > > > Current track: > https://share.delorme.com/CharlesMcKeown > > Bahama boat trip 2014 Photo Blog: > http://bevchasbahamas2014.blogspot.com/ > > Sent from my iPhone > > On Aug 28, 2018, at 6:31 PM, Rich Gano <richgano@gmail.com> wrote: > > What transmission? > > Rich Gano > FROLIC 2005 Mainship 30 Pilot II > Panama City, FL > > > We are in the Mississippi anchored in the current, off the channel, > safely. > > Went to he ER and heard a spinning noise and both props are spinning. > Estimate the current is 3 to 4 knots. > Can this do any damage? >