Empathy List Archives

MS

Mark Sims

Tue, Aug 26, 2014 1:10 AM

I have a 732A that is missing its battery module. Does anybody have or know of a source for a replacement?
Also, would there be any interest in a replacement circuit assembly for the battery module? It would probably consist of a small board that plugs into the 2x6 pin edge connector and another small board with the ballast lamp/diode/resistor/thermistors and connections for the battery/switch/external power jack. The two boards would be connected by a short ribbon cable and would allow one to add batteries to a 732A that is missing the battery module. It would not be a complete battery module with the metal frame and backplate...

I have a 732A that is missing its battery module. Does anybody have or know of a source for a replacement? Also, would there be any interest in a replacement circuit assembly for the battery module? It would probably consist of a small board that plugs into the 2x6 pin edge connector and another small board with the ballast lamp/diode/resistor/thermistors and connections for the battery/switch/external power jack. The two boards would be connected by a short ribbon cable and would allow one to add batteries to a 732A that is missing the battery module. It would not be a complete battery module with the metal frame and backplate...

TM

Todd Micallef

Tue, Aug 26, 2014 1:56 AM

Mark,

If you need any scans or measurements, let me know. I have one that will be disassembled for the next 24hrs. I can get this for you tomorrow evening before I replace the batteries.

Todd

Sent from my iPad

On Aug 25, 2014, at 21:10, Mark Sims holrum@hotmail.com wrote:

I have a 732A that is missing its battery module. Does anybody have or know of a source for a replacement?
Also, would there be any interest in a replacement circuit assembly for the battery module? It would probably consist of a small board that plugs into the 2x6 pin edge connector and another small board with the ballast lamp/diode/resistor/thermistors and connections for the battery/switch/external power jack. The two boards would be connected by a short ribbon cable and would allow one to add batteries to a 732A that is missing the battery module. It would not be a complete battery module with the metal frame and backplate...

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

Mark, If you need any scans or measurements, let me know. I have one that will be disassembled for the next 24hrs. I can get this for you tomorrow evening before I replace the batteries. Todd Sent from my iPad > On Aug 25, 2014, at 21:10, Mark Sims <holrum@hotmail.com> wrote: > > I have a 732A that is missing its battery module. Does anybody have or know of a source for a replacement? > Also, would there be any interest in a replacement circuit assembly for the battery module? It would probably consist of a small board that plugs into the 2x6 pin edge connector and another small board with the ballast lamp/diode/resistor/thermistors and connections for the battery/switch/external power jack. The two boards would be connected by a short ribbon cable and would allow one to add batteries to a 732A that is missing the battery module. It would not be a complete battery module with the metal frame and backplate... > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

DM

Dave M

Tue, Aug 26, 2014 3:06 AM

Todd Micallef wrote:

Mark,

If you need any scans or measurements, let me know. I have one that
will be disassembled for the next 24hrs. I can get this for you
tomorrow evening before I replace the batteries.

Todd

Sent from my iPad

On Aug 25, 2014, at 21:10, Mark Sims holrum@hotmail.com wrote:

I have a 732A that is missing its battery module. Does anybody have
or know of a source for a replacement?
Also, would there be any interest in a replacement circuit assembly
for the battery module? It would probably consist of a small board
that plugs into the 2x6 pin edge connector and another small board
with the ballast lamp/diode/resistor/thermistors and connections for
the battery/switch/external power jack. The two boards would be
connected by a short ribbon cable and would allow one to add
batteries to a 732A that is missing the battery module. It would
not be a complete battery module with the metal frame and
backplate... _______________________________________________

I'd like to have one, maybe two. I have a couple of 732A units in the shop.

Dave M

Todd Micallef wrote: > Mark, > > If you need any scans or measurements, let me know. I have one that > will be disassembled for the next 24hrs. I can get this for you > tomorrow evening before I replace the batteries. > > Todd > > Sent from my iPad > >> On Aug 25, 2014, at 21:10, Mark Sims <holrum@hotmail.com> wrote: >> >> I have a 732A that is missing its battery module. Does anybody have >> or know of a source for a replacement? >> Also, would there be any interest in a replacement circuit assembly >> for the battery module? It would probably consist of a small board >> that plugs into the 2x6 pin edge connector and another small board >> with the ballast lamp/diode/resistor/thermistors and connections for >> the battery/switch/external power jack. The two boards would be >> connected by a short ribbon cable and would allow one to add >> batteries to a 732A that is missing the battery module. It would >> not be a complete battery module with the metal frame and >> backplate... _______________________________________________ I'd like to have one, maybe two. I have a couple of 732A units in the shop. Dave M

TM

Tom Miller

Tue, Aug 26, 2014 3:32 AM

It might be nice to do a lithium pack including all the safety controls. The
down side is you would not be able to ship it by air.

Tom

----- Original Message -----
From: "Mark Sims" holrum@hotmail.com
To: volt-nuts@febo.com
Sent: Monday, August 25, 2014 9:10 PM
Subject: [volt-nuts] Fluke 732A battery module (and possible
circuitreplacement)

I have a 732A that is missing its battery module. Does anybody have or
know of a source for a replacement?
Also, would there be any interest in a replacement circuit assembly for
the battery module? It would probably consist of a small board that plugs
into the 2x6 pin edge connector and another small board with the ballast
lamp/diode/resistor/thermistors and connections for the
battery/switch/external power jack. The two boards would be connected by
a short ribbon cable and would allow one to add batteries to a 732A that
is missing the battery module. It would not be a complete battery module
with the metal frame and backplate...

It might be nice to do a lithium pack including all the safety controls. The down side is you would not be able to ship it by air. Tom ----- Original Message ----- From: "Mark Sims" <holrum@hotmail.com> To: <volt-nuts@febo.com> Sent: Monday, August 25, 2014 9:10 PM Subject: [volt-nuts] Fluke 732A battery module (and possible circuitreplacement) >I have a 732A that is missing its battery module. Does anybody have or >know of a source for a replacement? > Also, would there be any interest in a replacement circuit assembly for > the battery module? It would probably consist of a small board that plugs > into the 2x6 pin edge connector and another small board with the ballast > lamp/diode/resistor/thermistors and connections for the > battery/switch/external power jack. The two boards would be connected by > a short ribbon cable and would allow one to add batteries to a 732A that > is missing the battery module. It would not be a complete battery module > with the metal frame and backplate... > _______________________________________________

volt-nuts@lists.febo.com

Fluke 732A battery module (and possible circuit replacement)