I'm posting this to both the Time Nuts and Volt Nuts list, as some folks don't belong to both. I need to get rid of some items. It has gotten so cluttered around here that I can hardly get any work done. Several items are free for the cost of postage. These items are marked (postage). The rest of the items are to go for whatever is offered, plus postage. All items working, unless stated otherwise. On the loose parts and boards, who knows. Six circuit boards from a trashed Fluke 839A. (postage) Three standard dry cells that are no longer any good. (postage) Two Narda Model 491 power monitors. One marked "bad", the other marked "drifts". (postage) Fluke 8842A multimeter w/ GPIB. Non-working. (postage) Circuit board from a Keithly 191 multimeter. Has an LM399H and other goodies on it. (postage) Advantec PCM-5820 PC-104 computer: https://dl.dropboxusercontent.com/u/19599147/Advantec%20-%20top.jpg https://dl.dropboxusercontent.com/u/19599147/Advantec%20-%20bottom.jpg Soekris net4501 in a box (has Monowall on CF): https://dl.dropboxusercontent.com/u/19599147/Soekris.jpg Leeds and Northrup four decade resistance in wooden box. General Radio four decade resistance in wooden box. General Radio four decade resistance in metal box. Broken plastic at base of one terminal. Eico five decade resistance in metal box. General Resistance Dial-A-Vider seven decade resistance in rack-mount box Fluke 510A AC reference standard. Has original NiCad pack, but I removed it to prevent corrosion. Fluke A90 current shunt. One terminal has cracked plastic outer piece (included). Keithley 197 5-1/2 digit microvolt DMM. Bio-Rad Power Pac 300. Front panel programmable voltage and current (10-300 VDC in 1 V steps, 4-400 mA in 1 mA steps). Originally used for electrophoresis. HP 59501B isolated DAC / Power supply programmer. I may have more items later, as I continue to shovel out the closets and the garage. Joe Gray W5JG

Hi Joe, Whats the frequency of the Fluke 510A? Dallas On 5/11/2014 10:31 PM, Joseph Gray wrote: > Fluke 510A AC reference standard. Has original NiCad pack, but I > removed it to prevent corrosion.

1000 Hz. Joe Gray W5JG On Sun, May 11, 2014 at 8:46 PM, Dallas Smith <dosmith@outlook.com> wrote: > > Hi Joe, > > Whats the frequency of the Fluke 510A? > > Dallas > > > > On 5/11/2014 10:31 PM, Joseph Gray wrote: >> >> Fluke 510A AC reference standard. Has original NiCad pack, but I >> removed it to prevent corrosion. > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. >

On 12/05/2014 04:48, Joseph Gray wrote: > 1000 Hz. > > Joe Gray > W5JG > > > On Sun, May 11, 2014 at 8:46 PM, Dallas Smith <dosmith@outlook.com> wrote: >> Hi Joe, >> >> Whats the frequency of the Fluke 510A? >> >> Dallas >> >> >> >> On 5/11/2014 10:31 PM, Joseph Gray wrote: >>> Fluke 510A AC reference standard. Has original NiCad pack, but I >>> removed it to prevent corrosion. >> Hi Where are you, as in which country, Q from a UK member.

Hello Joe, I'm a subscriber of Volt-nuts, looking at time-nuts too. Living in the Netherlands: Wim de Jong Prickwaert 59 3363BA Sliedrecht The Netherlands email: wim.de.jong.59@solcon.nl Mobile: +31 6 4714 9944 Met vriendelijke groet, Wim Kind regards, Wim. Wim de Jong Tel.: +316-4714 9944 wim.de.jong.59@solcon.nl M K schreef op 12-5-2014 18:49: > On 12/05/2014 04:48, Joseph Gray wrote: >> 1000 Hz. >> >> Joe Gray >> W5JG >> >> >> On Sun, May 11, 2014 at 8:46 PM, Dallas Smith <dosmith@outlook.com> >> wrote: >>> Hi Joe, >>> >>> Whats the frequency of the Fluke 510A? >>> >>> Dallas >>> >>> >>> >>> On 5/11/2014 10:31 PM, Joseph Gray wrote: >>>> Fluke 510A AC reference standard. Has original NiCad pack, but I >>>> removed it to prevent corrosion. >>> > Hi Where are you, as in which country, Q from a UK member. > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. >

On 12/05/2014 03:31, Joseph Gray wrote: > I'm posting this to both the Time Nuts and Volt Nuts list, as some > folks don't belong to both. > > I need to get rid of some items. It has gotten so cluttered around > here that I can hardly get any work done. > > Several items are free for the cost of postage. These items are marked > (postage). The rest of the items are to go for whatever is offered, > plus postage. All items working, unless stated otherwise. On the loose > parts and boards, who knows. > > Six circuit boards from a trashed Fluke 839A. (postage) > > Three standard dry cells that are no longer any good. (postage) > > Two Narda Model 491 power monitors. One marked "bad", the other marked > "drifts". (postage) > > Fluke 8842A multimeter w/ GPIB. Non-working. (postage) > > Circuit board from a Keithly 191 multimeter. Has an LM399H and other > goodies on it. (postage) > > Advantec PCM-5820 PC-104 computer: > https://dl.dropboxusercontent.com/u/19599147/Advantec%20-%20top.jpg > https://dl.dropboxusercontent.com/u/19599147/Advantec%20-%20bottom.jpg > > Soekris net4501 in a box (has Monowall on CF): > https://dl.dropboxusercontent.com/u/19599147/Soekris.jpg > > Leeds and Northrup four decade resistance in wooden box. > > General Radio four decade resistance in wooden box. > > General Radio four decade resistance in metal box. Broken plastic at > base of one terminal. > > Eico five decade resistance in metal box. > > General Resistance Dial-A-Vider seven decade resistance in rack-mount box > > Fluke 510A AC reference standard. Has original NiCad pack, but I > removed it to prevent corrosion. > > Fluke A90 current shunt. One terminal has cracked plastic outer piece > (included). > > Keithley 197 5-1/2 digit microvolt DMM. > > Bio-Rad Power Pac 300. Front panel programmable voltage and current > (10-300 VDC in 1 V steps, 4-400 mA in 1 mA steps). Originally used for > electrophoresis. > > HP 59501B isolated DAC / Power supply programmer. > > I may have more items later, as I continue to shovel out the closets > and the garage. > > Joe Gray > W5JG > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > Hi Joe, From your email provider I am guessing you are in the US. Please may I have the Keithley PCB to send to: 143 Peperharow Rd, Godalming, Surrey GU7 2PW England Regards, Mike

I would be interested in the fluke 8842A if you can tell what the postage would be to the UK Regards Simon McNally

Sorry, it is gone. On May 23, 2014 2:08 PM, "Simon McNally" <simon.mcnally@sky.com> wrote: > I would be interested in the fluke 8842A if you can tell what the postage > would be to the UK > Regards > Simon McNally > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/volt-nuts > and follow the instructions there. > >

Oh well, guess this stuff does not hang about long! What about the keithley board? Sorry, it is gone. On May 23, 2014 2:08 PM, "Simon McNally" <simon.mcnally at sky.com <https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts>> wrote: >/ I would be interested in the fluke 8842A if you can tell what the postage />/ would be to the UK />/ Regards />/ Simon McNally />/ _______________________________________________ />/ volt-nuts mailing list --volt-nuts at febo.com <https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts> />/ To unsubscribe, go tohttps://www.febo.com/cgi-bin/ />/ mailman/listinfo/volt-nuts />/ and follow the instructions there. />/ />

Also gone. Joe On Sat, May 24, 2014 at 6:02 AM, Simon McNally <simon.mcnally@sky.com> wrote: > Oh well, guess this stuff does not hang about long! What about the keithley > board? > > > Sorry, it is gone. > On May 23, 2014 2:08 PM, "Simon McNally" <simon.mcnally at sky.com > <https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts>> wrote: > >> / I would be interested in the fluke 8842A if you can tell what the >> postage > > />/ would be to the UK > />/ Regards > />/ Simon McNally > />/ _______________________________________________ > />/ volt-nuts mailing list --volt-nuts at febo.com > <https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts> > />/ To unsubscribe, go tohttps://www.febo.com/cgi-bin/ > />/ mailman/listinfo/volt-nuts > />/ and follow the instructions there. > />/ > /> > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. >