Empathy List Archives

JB

Jim Bacher

Tue, Mar 14, 2017 2:52 PM

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV, will
be there a lot, there is a need to set up and tear down the booth on Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help out.
I'll get you a Vendor Pass for your trouble. With the new site, parking passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

Hi folks... Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, number 6708. It is located in Building 6, which appears to be a large tent on a paved surface southwest of the three main buildings. You can find it on the Hamvention web site if you follow the vendors tab to the map. We will have electricity available, and being 'outside', we should be able to have antennas in the booth that may actually hear for demo's. Anything that can attach to the table or is free-standing is OK, but I do not know how high the ceiling of the tent will be. As always, we need to staff the booth for the show, and while Mike, N8QHV, will be there a lot, there is a need to set up and tear down the booth on Thursday and Sunday, as well as give Mike periodic breaks throughout the weekend. A lot of you will be attending the show, and even an hour at some point will be appreciated. Please let me know if you can find some time over the busy weekend to help out. I'll get you a Vendor Pass for your trouble. With the new site, parking passes are said to be unnecessary. You can reply to me at n8zm@mvus.org. Thanks for your support of MVUS. Oh, and don't miss the VHF Forum on Saturday at 3:15! Tom Holmes, N8ZM

J

Joe

Tue, Mar 14, 2017 5:32 PM

Jim,

Would you forward this to the Hamvention committee:
The Hamvention website still has the old Hara Arena map, and not the new map.
See http://hamvention.org/vendors/ and select the Published Maps link.

Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated.

Joe Burke - WA8OGS

On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list mvus-list@febo.com wrote:

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV, will
be there a lot, there is a need to set up and tear down the booth on Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help out.
I'll get you a Vendor Pass for your trouble. With the new site, parking passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

mvus-list mailing list
mvus-list@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

Jim, Would you forward this to the Hamvention committee: The Hamvention website still has the old Hara Arena map, and not the new map. See http://hamvention.org/vendors/ and select the Published Maps link. Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated. Joe Burke - WA8OGS > On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com> wrote: > > Hi folks... > > Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, number > 6708. It is located in Building 6, which appears to be a large tent > on a paved surface southwest of the three main buildings. You can find it > on the Hamvention web site if you follow the vendors tab to the map. > > We will have electricity available, and being 'outside', we should be able > to have > antennas in the booth that may actually hear for demo's. Anything that > can attach > to the table or is free-standing is OK, but I do not know how high > the ceiling of the tent will be. > > As always, we need to staff the booth for the show, and while Mike, N8QHV, will > be there a lot, there is a need to set up and tear down the booth on Thursday > and Sunday, as well as give Mike periodic breaks throughout the > weekend. A lot of you will be attending the show, and even an hour at > some point > will be appreciated. > > Please let me know if you can find some time over the busy weekend to help out. > I'll get you a Vendor Pass for your trouble. With the new site, parking passes > are said to be unnecessary. > > You can reply to me at n8zm@mvus.org. > > Thanks for your support of MVUS. > > Oh, and don't miss the VHF Forum on Saturday at 3:15! > > Tom Holmes, N8ZM > _______________________________________________ > mvus-list mailing list > mvus-list@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

TH

Tom Holmes

Tue, Mar 14, 2017 7:46 PM

HI Joe...

Thanks for that. I'll pass it on.

The maps you are looking for are under the vendors tab at the top, and on the
Inside Exhibits page. You'll have to scroll down a bit to get to them.

Tom Holmes, N8ZM

-----Original Message-----
From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via
mvus-list
Sent: Tuesday, March 14, 2017 1:33 PM
To: Jim Bacher j.bacher@ieee.org; Midwest VHF/UHF Society Mailing List
mvus-list@febo.com
Subject: Re: [mvus-list] MVUS and Hamvention

Jim,

Would you forward this to the Hamvention committee:
The Hamvention website still has the old Hara Arena map, and not the new map.
See http://hamvention.org/vendors/ and select the Published Maps link.

Found this when looking for a sit map - which I did not find. The flea market
map looks ok - updated.

Joe Burke - WA8OGS

On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list mvus-list@febo.com
wrote:

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention,
number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV,
will
be there a lot, there is a need to set up and tear down the booth on
Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help
out.
I'll get you a Vendor Pass for your trouble. With the new site, parking
passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

mvus-list mailing list
mvus-list@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

HI Joe... Thanks for that. I'll pass it on. The maps you are looking for are under the vendors tab at the top, and on the Inside Exhibits page. You'll have to scroll down a bit to get to them. Tom Holmes, N8ZM -----Original Message----- From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via mvus-list Sent: Tuesday, March 14, 2017 1:33 PM To: Jim Bacher <j.bacher@ieee.org>; Midwest VHF/UHF Society Mailing List <mvus-list@febo.com> Subject: Re: [mvus-list] MVUS and Hamvention Jim, Would you forward this to the Hamvention committee: The Hamvention website still has the old Hara Arena map, and not the new map. See http://hamvention.org/vendors/ and select the Published Maps link. Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated. Joe Burke - WA8OGS > On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com> > wrote: > > Hi folks... > > Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, > number > 6708. It is located in Building 6, which appears to be a large tent > on a paved surface southwest of the three main buildings. You can find it > on the Hamvention web site if you follow the vendors tab to the map. > > We will have electricity available, and being 'outside', we should be able > to have > antennas in the booth that may actually hear for demo's. Anything that > can attach > to the table or is free-standing is OK, but I do not know how high > the ceiling of the tent will be. > > As always, we need to staff the booth for the show, and while Mike, N8QHV, > will > be there a lot, there is a need to set up and tear down the booth on > Thursday > and Sunday, as well as give Mike periodic breaks throughout the > weekend. A lot of you will be attending the show, and even an hour at > some point > will be appreciated. > > Please let me know if you can find some time over the busy weekend to help > out. > I'll get you a Vendor Pass for your trouble. With the new site, parking > passes > are said to be unnecessary. > > You can reply to me at n8zm@mvus.org. > > Thanks for your support of MVUS. > > Oh, and don't miss the VHF Forum on Saturday at 3:15! > > Tom Holmes, N8ZM > _______________________________________________ > mvus-list mailing list > mvus-list@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

RM

Randy Midkiff

Tue, Mar 14, 2017 8:38 PM

Yeap needs fixed albeit the new maps are there. See under vendors you have flea market and indoor with maps under those specific catagories.

http://hamvention.org/wp-content/uploads/2017/01/Booths-Exhibits-Overview.pdf

Randy

-----Original Message-----
From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via mvus-list
Sent: Tuesday, March 14, 2017 1:33 PM
To: Jim Bacher; Midwest VHF/UHF Society Mailing List
Subject: Re: [mvus-list] MVUS and Hamvention

Jim,

Would you forward this to the Hamvention committee:
The Hamvention website still has the old Hara Arena map, and not the new map.
See http://hamvention.org/vendors/ and select the Published Maps link.

Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated.

Joe Burke - WA8OGS

On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list mvus-list@febo.com wrote:

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV, will
be there a lot, there is a need to set up and tear down the booth on Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help out.
I'll get you a Vendor Pass for your trouble. With the new site, parking passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

mvus-list mailing list
mvus-list@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

Yeap needs fixed albeit the new maps are there. See under vendors you have flea market and indoor with maps under those specific catagories. http://hamvention.org/wp-content/uploads/2017/01/Booths-Exhibits-Overview.pdf Randy -----Original Message----- From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via mvus-list Sent: Tuesday, March 14, 2017 1:33 PM To: Jim Bacher; Midwest VHF/UHF Society Mailing List Subject: Re: [mvus-list] MVUS and Hamvention Jim, Would you forward this to the Hamvention committee: The Hamvention website still has the old Hara Arena map, and not the new map. See http://hamvention.org/vendors/ and select the Published Maps link. Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated. Joe Burke - WA8OGS > On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com> wrote: > > Hi folks... > > Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, number > 6708. It is located in Building 6, which appears to be a large tent > on a paved surface southwest of the three main buildings. You can find it > on the Hamvention web site if you follow the vendors tab to the map. > > We will have electricity available, and being 'outside', we should be able > to have > antennas in the booth that may actually hear for demo's. Anything that > can attach > to the table or is free-standing is OK, but I do not know how high > the ceiling of the tent will be. > > As always, we need to staff the booth for the show, and while Mike, N8QHV, will > be there a lot, there is a need to set up and tear down the booth on Thursday > and Sunday, as well as give Mike periodic breaks throughout the > weekend. A lot of you will be attending the show, and even an hour at > some point > will be appreciated. > > Please let me know if you can find some time over the busy weekend to help out. > I'll get you a Vendor Pass for your trouble. With the new site, parking passes > are said to be unnecessary. > > You can reply to me at n8zm@mvus.org. > > Thanks for your support of MVUS. > > Oh, and don't miss the VHF Forum on Saturday at 3:15! > > Tom Holmes, N8ZM > _______________________________________________ > mvus-list mailing list > mvus-list@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

KB

KENT BRITAIN

Tue, Mar 14, 2017 10:25 PM

Any hope on the Fleamarket slots? Kent WA5VJB

  From: Tom Holmes via mvus-list <mvus-list@febo.com>

To: 'Joe' gojoe55@gmail.com; 'Midwest VHF/UHF Society Mailing List' mvus-list@febo.com; 'Jim Bacher' j.bacher@ieee.org
Sent: Tuesday, March 14, 2017 2:46 PM
Subject: Re: [mvus-list] MVUS and Hamvention

HI Joe...

Thanks for that. I'll pass it on.

The maps you are looking for are under the vendors tab at the top, and on the
Inside Exhibits page. You'll have to scroll down a bit to get to them.

Tom Holmes, N8ZM

-----Original Message-----
From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via
mvus-list
Sent: Tuesday, March 14, 2017 1:33 PM
To: Jim Bacher j.bacher@ieee.org; Midwest VHF/UHF Society Mailing List
mvus-list@febo.com
Subject: Re: [mvus-list] MVUS and Hamvention

Jim,

Would you forward this to the Hamvention committee:
The Hamvention website still has the old Hara Arena map, and not the new map.
See http://hamvention.org/vendors/ and select the Published Maps link.

Found this when looking for a sit map - which I did not find. The flea market
map looks ok - updated.

Joe Burke - WA8OGS

On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list mvus-list@febo.com
wrote:

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention,
number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV,
will
be there a lot, there is a need to set up and tear down the booth on
Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help
out.
I'll get you a Vendor Pass for your trouble. With the new site, parking
passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

mvus-list mailing list
mvus-list@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

Any hope on the Fleamarket slots? Kent WA5VJB From: Tom Holmes via mvus-list <mvus-list@febo.com> To: 'Joe' <gojoe55@gmail.com>; 'Midwest VHF/UHF Society Mailing List' <mvus-list@febo.com>; 'Jim Bacher' <j.bacher@ieee.org> Sent: Tuesday, March 14, 2017 2:46 PM Subject: Re: [mvus-list] MVUS and Hamvention HI Joe... Thanks for that. I'll pass it on. The maps you are looking for are under the vendors tab at the top, and on the Inside Exhibits page. You'll have to scroll down a bit to get to them. Tom Holmes, N8ZM -----Original Message----- From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via mvus-list Sent: Tuesday, March 14, 2017 1:33 PM To: Jim Bacher <j.bacher@ieee.org>; Midwest VHF/UHF Society Mailing List <mvus-list@febo.com> Subject: Re: [mvus-list] MVUS and Hamvention Jim, Would you forward this to the Hamvention committee: The Hamvention website still has the old Hara Arena map, and not the new map. See http://hamvention.org/vendors/ and select the Published Maps link. Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated. Joe Burke - WA8OGS > On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com> > wrote: > > Hi folks... > > Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, > number > 6708. It is located in Building 6, which appears to be a large tent > on a paved surface southwest of the three main buildings. You can find it > on the Hamvention web site if you follow the vendors tab to the map. > > We will have electricity available, and being 'outside', we should be able > to have > antennas in the booth that may actually hear for demo's. Anything that > can attach > to the table or is free-standing is OK, but I do not know how high > the ceiling of the tent will be. > > As always, we need to staff the booth for the show, and while Mike, N8QHV, > will > be there a lot, there is a need to set up and tear down the booth on > Thursday > and Sunday, as well as give Mike periodic breaks throughout the > weekend. A lot of you will be attending the show, and even an hour at > some point > will be appreciated. > > Please let me know if you can find some time over the busy weekend to help > out. > I'll get you a Vendor Pass for your trouble. With the new site, parking > passes > are said to be unnecessary. > > You can reply to me at n8zm@mvus.org. > > Thanks for your support of MVUS. > > Oh, and don't miss the VHF Forum on Saturday at 3:15! > > Tom Holmes, N8ZM > _______________________________________________ > mvus-list mailing list > mvus-list@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

AA

Andrew Anderson

Wed, Mar 15, 2017 12:57 PM

Booth tracker is not yet ready to open up for Flea Market spaces. You can go online and fill out a request form and email it to fleamarket@hamvention.org. It will take a few days for them to respond. They literally have HUNDREDS of requests for spaces. Since everything is new this year, accounts have to be created from scratch. They are close to working out the bugs in Booth Tracker and will go online within the next couple of weeks. But they are processing orders now. Be patient. It's taking a bit longer than expected. Place your order with them now so you have a better chance of getting the space(s) you want.

Currently, there are plenty of Flea Market spaces available. Inside Exhibits spaces are SOLD OUT. No doubt it's going to be an interesting show this year.
73 de Sam Anderson N8VESPresident - Dayton Amateur Radio Association

  From: KENT BRITAIN via mvus-list <mvus-list@febo.com>

To: Tom Holmes tholmes@woh.rr.com; 'Joe' gojoe55@gmail.com; 'Midwest VHF/UHF Society Mailing List' mvus-list@febo.com; 'Jim Bacher' j.bacher@ieee.org; Midwest VHF/UHF Society Mailing List mvus-list@febo.com
Sent: Tuesday, March 14, 2017 6:25 PM
Subject: Re: [mvus-list] MVUS and Hamvention

Any hope on the Fleamarket slots? Kent WA5VJB

From: Tom Holmes via mvus-list mvus-list@febo.com
To: 'Joe' gojoe55@gmail.com; 'Midwest VHF/UHF Society Mailing List' mvus-list@febo.com; 'Jim Bacher' j.bacher@ieee.org
Sent: Tuesday, March 14, 2017 2:46 PM
Subject: Re: [mvus-list] MVUS and Hamvention

HI Joe...

Thanks for that. I'll pass it on.

The maps you are looking for are under the vendors tab at the top, and on the
Inside Exhibits page. You'll have to scroll down a bit to get to them.

Tom Holmes, N8ZM

-----Original Message-----
From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via
mvus-list
Sent: Tuesday, March 14, 2017 1:33 PM
To: Jim Bacher j.bacher@ieee.org; Midwest VHF/UHF Society Mailing List
mvus-list@febo.com
Subject: Re: [mvus-list] MVUS and Hamvention

Jim,

Would you forward this to the Hamvention committee:
The Hamvention website still has the old Hara Arena map, and not the new map.
See http://hamvention.org/vendors/ and select the Published Maps link.

Found this when looking for a sit map - which I did not find. The flea market
map looks ok - updated.

Joe Burke - WA8OGS

On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list mvus-list@febo.com
wrote:

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention,
number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV,
will
be there a lot, there is a need to set up and tear down the booth on
Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help
out.
I'll get you a Vendor Pass for your trouble. With the new site, parking
passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

mvus-list mailing list
mvus-list@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

Booth tracker is not yet ready to open up for Flea Market spaces. You can go online and fill out a request form and email it to fleamarket@hamvention.org. It will take a few days for them to respond. They literally have HUNDREDS of requests for spaces. Since everything is new this year, accounts have to be created from scratch. They are close to working out the bugs in Booth Tracker and will go online within the next couple of weeks. But they are processing orders now. Be patient. It's taking a bit longer than expected. Place your order with them now so you have a better chance of getting the space(s) you want. Currently, there are plenty of Flea Market spaces available. Inside Exhibits spaces are SOLD OUT. No doubt it's going to be an interesting show this year. 73 de Sam Anderson N8VESPresident - Dayton Amateur Radio Association From: KENT BRITAIN via mvus-list <mvus-list@febo.com> To: Tom Holmes <tholmes@woh.rr.com>; 'Joe' <gojoe55@gmail.com>; 'Midwest VHF/UHF Society Mailing List' <mvus-list@febo.com>; 'Jim Bacher' <j.bacher@ieee.org>; Midwest VHF/UHF Society Mailing List <mvus-list@febo.com> Sent: Tuesday, March 14, 2017 6:25 PM Subject: Re: [mvus-list] MVUS and Hamvention Any hope on the Fleamarket slots? Kent WA5VJB From: Tom Holmes via mvus-list <mvus-list@febo.com> To: 'Joe' <gojoe55@gmail.com>; 'Midwest VHF/UHF Society Mailing List' <mvus-list@febo.com>; 'Jim Bacher' <j.bacher@ieee.org> Sent: Tuesday, March 14, 2017 2:46 PM Subject: Re: [mvus-list] MVUS and Hamvention HI Joe... Thanks for that. I'll pass it on. The maps you are looking for are under the vendors tab at the top, and on the Inside Exhibits page. You'll have to scroll down a bit to get to them. Tom Holmes, N8ZM -----Original Message----- From: mvus-list [mailto:mvus-list-bounces@febo.com] On Behalf Of Joe via mvus-list Sent: Tuesday, March 14, 2017 1:33 PM To: Jim Bacher <j.bacher@ieee.org>; Midwest VHF/UHF Society Mailing List <mvus-list@febo.com> Subject: Re: [mvus-list] MVUS and Hamvention Jim, Would you forward this to the Hamvention committee: The Hamvention website still has the old Hara Arena map, and not the new map. See http://hamvention.org/vendors/ and select the Published Maps link. Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated. Joe Burke - WA8OGS > On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com> > wrote: > > Hi folks... > > Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, > number > 6708. It is located in Building 6, which appears to be a large tent > on a paved surface southwest of the three main buildings. You can find it > on the Hamvention web site if you follow the vendors tab to the map. > > We will have electricity available, and being 'outside', we should be able > to have > antennas in the booth that may actually hear for demo's. Anything that > can attach > to the table or is free-standing is OK, but I do not know how high > the ceiling of the tent will be. > > As always, we need to staff the booth for the show, and while Mike, N8QHV, > will > be there a lot, there is a need to set up and tear down the booth on > Thursday > and Sunday, as well as give Mike periodic breaks throughout the > weekend. A lot of you will be attending the show, and even an hour at > some point > will be appreciated. > > Please let me know if you can find some time over the busy weekend to help > out. > I'll get you a Vendor Pass for your trouble. With the new site, parking > passes > are said to be unnecessary. > > You can reply to me at n8zm@mvus.org. > > Thanks for your support of MVUS. > > Oh, and don't miss the VHF Forum on Saturday at 3:15! > > Tom Holmes, N8ZM > _______________________________________________ > mvus-list mailing list > mvus-list@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

TH

Tom Holmes

Wed, Mar 15, 2017 1:25 PM

Kent…

They are actively accepting orders now. Go to the web page and drop down the Vendor tab. You’ll see the latest info when you select Flea Market.

Tom Holmes, N8ZM

From: KENT BRITAIN [mailto:wa5vjb@flash.net]
Sent: Tuesday, March 14, 2017 6:25 PM
To: Tom Holmes tholmes@woh.rr.com; 'Joe' gojoe55@gmail.com; 'Midwest VHF/UHF Society Mailing List' mvus-list@febo.com; 'Jim Bacher' j.bacher@ieee.org; Midwest VHF/UHF Society Mailing List mvus-list@febo.com
Subject: Re: [mvus-list] MVUS and Hamvention

Any hope on the Fleamarket slots? Kent WA5VJB

From: Tom Holmes via mvus-list <mvus-list@febo.com mailto:mvus-list@febo.com >
To: 'Joe' <gojoe55@gmail.com mailto:gojoe55@gmail.com >; 'Midwest VHF/UHF Society Mailing List' <mvus-list@febo.com mailto:mvus-list@febo.com >; 'Jim Bacher' <j.bacher@ieee.org mailto:j.bacher@ieee.org >
Sent: Tuesday, March 14, 2017 2:46 PM
Subject: Re: [mvus-list] MVUS and Hamvention

HI Joe...

Thanks for that. I'll pass it on.

The maps you are looking for are under the vendors tab at the top, and on the
Inside Exhibits page. You'll have to scroll down a bit to get to them.

Tom Holmes, N8ZM

-----Original Message-----
From: mvus-list [mailto:mvus-list-bounces@febo.com mailto:mvus-list-bounces@febo.com ] On Behalf Of Joe via
mvus-list
Sent: Tuesday, March 14, 2017 1:33 PM
To: Jim Bacher <j.bacher@ieee.org mailto:j.bacher@ieee.org >; Midwest VHF/UHF Society Mailing List
<mvus-list@febo.com mailto:mvus-list@febo.com >
Subject: Re: [mvus-list] MVUS and Hamvention

Jim,

Would you forward this to the Hamvention committee:
The Hamvention website still has the old Hara Arena map, and not the new map.
See http://hamvention.org/vendors/ http://hamvention.org/vendors/ and select the Published Maps link.

Found this when looking for a sit map - which I did not find. The flea market
map looks ok - updated.

Joe Burke - WA8OGS

On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com mailto:mvus-list@febo.com >
wrote:

Hi folks...

Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention,
number
6708. It is located in Building 6, which appears to be a large tent
on a paved surface southwest of the three main buildings. You can find it
on the Hamvention web site if you follow the vendors tab to the map.

We will have electricity available, and being 'outside', we should be able
to have
antennas in the booth that may actually hear for demo's. Anything that
can attach
to the table or is free-standing is OK, but I do not know how high
the ceiling of the tent will be.

As always, we need to staff the booth for the show, and while Mike, N8QHV,
will
be there a lot, there is a need to set up and tear down the booth on
Thursday
and Sunday, as well as give Mike periodic breaks throughout the
weekend. A lot of you will be attending the show, and even an hour at
some point
will be appreciated.

Please let me know if you can find some time over the busy weekend to help
out.
I'll get you a Vendor Pass for your trouble. With the new site, parking
passes
are said to be unnecessary.

You can reply to me at n8zm@mvus.org. mailto:n8zm@mvus.org.

Thanks for your support of MVUS.

Oh, and don't miss the VHF Forum on Saturday at 3:15!

Tom Holmes, N8ZM

mvus-list mailing list
mvus-list@febo.com mailto:mvus-list@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

Kent… They are actively accepting orders now. Go to the web page and drop down the Vendor tab. You’ll see the latest info when you select Flea Market. Tom Holmes, N8ZM From: KENT BRITAIN [mailto:wa5vjb@flash.net] Sent: Tuesday, March 14, 2017 6:25 PM To: Tom Holmes <tholmes@woh.rr.com>; 'Joe' <gojoe55@gmail.com>; 'Midwest VHF/UHF Society Mailing List' <mvus-list@febo.com>; 'Jim Bacher' <j.bacher@ieee.org>; Midwest VHF/UHF Society Mailing List <mvus-list@febo.com> Subject: Re: [mvus-list] MVUS and Hamvention Any hope on the Fleamarket slots? Kent WA5VJB _____ From: Tom Holmes via mvus-list <mvus-list@febo.com <mailto:mvus-list@febo.com> > To: 'Joe' <gojoe55@gmail.com <mailto:gojoe55@gmail.com> >; 'Midwest VHF/UHF Society Mailing List' <mvus-list@febo.com <mailto:mvus-list@febo.com> >; 'Jim Bacher' <j.bacher@ieee.org <mailto:j.bacher@ieee.org> > Sent: Tuesday, March 14, 2017 2:46 PM Subject: Re: [mvus-list] MVUS and Hamvention HI Joe... Thanks for that. I'll pass it on. The maps you are looking for are under the vendors tab at the top, and on the Inside Exhibits page. You'll have to scroll down a bit to get to them. Tom Holmes, N8ZM -----Original Message----- From: mvus-list [mailto:mvus-list-bounces@febo.com <mailto:mvus-list-bounces@febo.com> ] On Behalf Of Joe via mvus-list Sent: Tuesday, March 14, 2017 1:33 PM To: Jim Bacher <j.bacher@ieee.org <mailto:j.bacher@ieee.org> >; Midwest VHF/UHF Society Mailing List <mvus-list@febo.com <mailto:mvus-list@febo.com> > Subject: Re: [mvus-list] MVUS and Hamvention Jim, Would you forward this to the Hamvention committee: The Hamvention website still has the old Hara Arena map, and not the new map. See http://hamvention.org/vendors/ <http://hamvention.org/vendors/> and select the Published Maps link. Found this when looking for a sit map - which I did not find. The flea market map looks ok - updated. Joe Burke - WA8OGS > On Mar 14, 2017, at 10:52 AM, Jim Bacher via mvus-list <mvus-list@febo.com <mailto:mvus-list@febo.com> > > wrote: > > Hi folks... > > Well, it's official, we have a booth at the 2017 Dayton(?) Hamvention, > number > 6708. It is located in Building 6, which appears to be a large tent > on a paved surface southwest of the three main buildings. You can find it > on the Hamvention web site if you follow the vendors tab to the map. > > We will have electricity available, and being 'outside', we should be able > to have > antennas in the booth that may actually hear for demo's. Anything that > can attach > to the table or is free-standing is OK, but I do not know how high > the ceiling of the tent will be. > > As always, we need to staff the booth for the show, and while Mike, N8QHV, > will > be there a lot, there is a need to set up and tear down the booth on > Thursday > and Sunday, as well as give Mike periodic breaks throughout the > weekend. A lot of you will be attending the show, and even an hour at > some point > will be appreciated. > > Please let me know if you can find some time over the busy weekend to help > out. > I'll get you a Vendor Pass for your trouble. With the new site, parking > passes > are said to be unnecessary. > > You can reply to me at n8zm@mvus.org. <mailto:n8zm@mvus.org.> > > Thanks for your support of MVUS. > > Oh, and don't miss the VHF Forum on Saturday at 3:15! > > Tom Holmes, N8ZM > _______________________________________________ > mvus-list mailing list > mvus-list@febo.com <mailto:mvus-list@febo.com> > https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com <mailto:mvus-list@febo.com> https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list _______________________________________________ mvus-list mailing list mvus-list@febo.com <mailto:mvus-list@febo.com> https://www.febo.com/cgi-bin/mailman/listinfo/mvus-list

mvus-list@lists.febo.com

MVUS and Hamvention