Hello Todd, many thanks for the reference schematics. But that's not the SelfCAL module. This should be capable of doing precise 10:1 ratio transfers, (I'm guessing), so recalibrating all ranges and reducing the T.C. You'll find this improvement (by a factor of nearly two) in the specifications, its key word is "Enhanced" specification Maybe, when you find some time again, please have a deeper look into the documents. Maybe, in the other service manuals, there might be a 'Theory of Operation' chapter? Frank

Ok, I will look at them again. Sent from my iPad > On Oct 30, 2015, at 07:26, Frank Stellmach <frank.stellmach@freenet.de> wrote: > > Hello Todd, > > many thanks for the reference schematics. > > But that's not the SelfCAL module. > > This should be capable of doing precise 10:1 ratio transfers, (I'm guessing), so recalibrating all ranges and reducing the T.C. You'll find this improvement (by a factor of nearly two) in the specifications, its key word is "Enhanced" specification > > Maybe, when you find some time again, please have a deeper look into the documents. > > Maybe, in the other service manuals, there might be a 'Theory of Operation' chapter? > > Frank > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.