Hi Mike,
On 7/11/22 18:11, Mike Monett via time-nuts wrote:
to Magnus:
I was not saying anything about measuring noise. I only stated that a DBM
has a square wave output at twice the signal frequency.
Thing is, you comment in a thread which is specifically about measuring
noise. Therefore things we are concerned about will very clearly relate
to noise of the circuit and noise of the source, and how that converts
to suitable measure.
If you are measurng OCXO noise, you might be interested in a method I just
described to Bob.
See the comments I just made relating to that.
Cheers,
Magnus
Hi Mike,
On 7/11/22 18:11, Mike Monett via time-nuts wrote:
> to Magnus:
>
> I was not saying anything about measuring noise. I only stated that a DBM
> has a square wave output at twice the signal frequency.
Thing is, you comment in a thread which is specifically about measuring
noise. Therefore things we are concerned about will very clearly relate
to noise of the circuit and noise of the source, and how that converts
to suitable measure.
> If you are measurng OCXO noise, you might be interested in a method I just
> described to Bob.
See the comments I just made relating to that.
Cheers,
Magnus
