Empathy List Archives

pjsip@lists.pjsip.org

pjsip list

Re: [pjsip] How to use different auto-answer codes for each account

Gerry Cohn

Mon, May 6, 2019 4:18 AM

I have managed to sort out this problem and can now have different answer codes for each account in pjsua.
The problem I now have is getting telnet to work.

I have tried the following:
'-use-cli' and '-cli-telnet-port=13579'
This did NOT work!

No matter what I do, I cannot establish a telnet connection to pjsua.

Has anyone managed to get this working in pjproject-2.8 running in a linux environment?

Regards,

Gerry Cohn
Director/Engineer
[ManIT Logo]

I have managed to sort out this problem and can now have different answer codes for each account in pjsua. The problem I now have is getting telnet to work. I have tried the following: '-use-cli' and '-cli-telnet-port=13579' This did NOT work! No matter what I do, I cannot establish a telnet connection to pjsua. Has anyone managed to get this working in pjproject-2.8 running in a linux environment? Regards, Gerry Cohn Director/Engineer [ManIT Logo]

Gerry Cohn

Mon, May 6, 2019 9:49 AM

Ok, problem solved.
'telnetd' was running and caused the telnet service in pjsua to fail.
After removing telnetd from the system it all started to work.

Gerry Cohn
Director/Engineer
[ManIT Logo]

From: pjsip [mailto:pjsip-bounces@lists.pjsip.org] On Behalf Of Gerry Cohn
Sent: Monday, 6 May 2019 2:19 PM
To: pjsip@lists.pjsip.org
Subject: Re: [pjsip] How to use different auto-answer codes for each account

I have managed to sort out this problem and can now have different answer codes for each account in pjsua.
The problem I now have is getting telnet to work.

I have tried the following:
'-use-cli' and '-cli-telnet-port=13579'
This did NOT work!

No matter what I do, I cannot establish a telnet connection to pjsua.

Has anyone managed to get this working in pjproject-2.8 running in a linux environment?

Regards,

Gerry Cohn
Director/Engineer
[ManIT Logo]

Ok, problem solved. 'telnetd' was running and caused the telnet service in pjsua to fail. After removing telnetd from the system it all started to work. Gerry Cohn Director/Engineer [ManIT Logo] From: pjsip [mailto:pjsip-bounces@lists.pjsip.org] On Behalf Of Gerry Cohn Sent: Monday, 6 May 2019 2:19 PM To: pjsip@lists.pjsip.org Subject: Re: [pjsip] How to use different auto-answer codes for each account I have managed to sort out this problem and can now have different answer codes for each account in pjsua. The problem I now have is getting telnet to work. I have tried the following: '-use-cli' and '-cli-telnet-port=13579' This did NOT work! No matter what I do, I cannot establish a telnet connection to pjsua. Has anyone managed to get this working in pjproject-2.8 running in a linux environment? Regards, Gerry Cohn Director/Engineer [ManIT Logo]