Empathy List Archives

DC

David C. Partridge

Thu, May 10, 2012 7:15 PM

I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter.

Ideally in TO99 metal can, but DIP8 if I can't get one in TO99

I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive.

I also know that there are some OP16s on eBay, but they too are rather costly.

Is anyone able to help?

Regards,
David Partridge

I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter. Ideally in TO99 metal can, but DIP8 if I can't get one in TO99 I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive. I also know that there are some OP16s on eBay, but they too are rather costly. Is anyone able to help? Regards, David Partridge

MK

m k

Thu, May 10, 2012 9:42 PM

Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too.

I will try and look at stocks over the weekend, but I dont think I have any of those.

MK

From: david.partridge@perdrix.co.uk
To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com
Date: Thu, 10 May 2012 20:15:17 +0100
Subject: [volt-nuts] WTB: OP16FJ or LT1022

I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter.

Ideally in TO99 metal can, but DIP8 if I can't get one in TO99

I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive.

I also know that there are some OP16s on eBay, but they too are rather costly.

Is anyone able to help?

Regards,
David Partridge

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too. I will try and look at stocks over the weekend, but I dont think I have any of those. MK > From: david.partridge@perdrix.co.uk > To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com > Date: Thu, 10 May 2012 20:15:17 +0100 > Subject: [volt-nuts] WTB: OP16FJ or LT1022 > > I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter. > > Ideally in TO99 metal can, but DIP8 if I can't get one in TO99 > > I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive. > > I also know that there are some OP16s on eBay, but they too are rather costly. > > Is anyone able to help? > > Regards, > David Partridge > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

JD

John Devereux

Fri, May 11, 2012 7:18 AM

Hi,

Where can one buy the genuine used LTZ1000 without the welded on legs?

John

m k m1k3k1@hotmail.com writes:

Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too.

I will try and look at stocks over the weekend, but I dont think I have any of those.

MK

From: david.partridge@perdrix.co.uk
To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com
Date: Thu, 10 May 2012 20:15:17 +0100
Subject: [volt-nuts] WTB: OP16FJ or LT1022

I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter.

Ideally in TO99 metal can, but DIP8 if I can't get one in TO99

I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive.

I also know that there are some OP16s on eBay, but they too are rather costly.

Is anyone able to help?

Regards,
David Partridge

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

--

John Devereux

Hi, Where can one buy the genuine used LTZ1000 without the welded on legs? John m k <m1k3k1@hotmail.com> writes: > Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too. > > I will try and look at stocks over the weekend, but I dont think I have any of those. > > MK > >> From: david.partridge@perdrix.co.uk >> To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com >> Date: Thu, 10 May 2012 20:15:17 +0100 >> Subject: [volt-nuts] WTB: OP16FJ or LT1022 >> >> I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter. >> >> Ideally in TO99 metal can, but DIP8 if I can't get one in TO99 >> >> I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive. >> >> I also know that there are some OP16s on eBay, but they too are rather costly. >> >> Is anyone able to help? >> >> Regards, >> David Partridge >> >> >> _______________________________________________ >> volt-nuts mailing list -- volt-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > -- John Devereux

MK

m k

Fri, May 11, 2012 6:40 PM

Caveat Emptor,

It was on a newsgroup post or a forum post where a Chinese member explained the various forms of trckery and provided pics of each type of fudge as well as genuine ones. Some are just banged out of a hot PCB in India by poor labour on less than a dollar a day pay from scrap equipment.

M K

From: john@devereux.me.uk
To: volt-nuts@febo.com
Date: Fri, 11 May 2012 08:18:01 +0100
Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022

Hi,

Where can one buy the genuine used LTZ1000 without the welded on legs?

John

m k m1k3k1@hotmail.com writes:

Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too.

I will try and look at stocks over the weekend, but I dont think I have any of those.

MK

From: david.partridge@perdrix.co.uk
To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com
Date: Thu, 10 May 2012 20:15:17 +0100
Subject: [volt-nuts] WTB: OP16FJ or LT1022

I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter.

Ideally in TO99 metal can, but DIP8 if I can't get one in TO99

I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive.

I also know that there are some OP16s on eBay, but they too are rather costly.

Is anyone able to help?

Regards,
David Partridge

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

--

John Devereux

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

Caveat Emptor, It was on a newsgroup post or a forum post where a Chinese member explained the various forms of trckery and provided pics of each type of fudge as well as genuine ones. Some are just banged out of a hot PCB in India by poor labour on less than a dollar a day pay from scrap equipment. M K > From: john@devereux.me.uk > To: volt-nuts@febo.com > Date: Fri, 11 May 2012 08:18:01 +0100 > Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022 > > > Hi, > > Where can one buy the genuine used LTZ1000 without the welded on legs? > > John > > m k <m1k3k1@hotmail.com> writes: > > > Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too. > > > > I will try and look at stocks over the weekend, but I dont think I have any of those. > > > > MK > > > >> From: david.partridge@perdrix.co.uk > >> To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com > >> Date: Thu, 10 May 2012 20:15:17 +0100 > >> Subject: [volt-nuts] WTB: OP16FJ or LT1022 > >> > >> I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter. > >> > >> Ideally in TO99 metal can, but DIP8 if I can't get one in TO99 > >> > >> I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive. > >> > >> I also know that there are some OP16s on eBay, but they too are rather costly. > >> > >> Is anyone able to help? > >> > >> Regards, > >> David Partridge > >> > >> > >> _______________________________________________ > >> volt-nuts mailing list -- volt-nuts@febo.com > >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > >> and follow the instructions there. > > > > _______________________________________________ > > volt-nuts mailing list -- volt-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > > and follow the instructions there. > > > > -- > > John Devereux > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

JD

John Devereux

Sat, May 12, 2012 7:00 AM

Yes I saw that one, that was posted here. In fact I was hoping for a
recommendation from him (or others).

New LTZ1000CH seem to be unavailable at present.

John

m k m1k3k1@hotmail.com writes:

Caveat Emptor,

It was on a newsgroup post or a forum post where a Chinese member explained the various forms of trckery and provided pics of each type of fudge as well as genuine ones. Some are just banged out of a hot PCB in India by poor labour on less than a dollar a day pay from scrap equipment.

M K

From: john@devereux.me.uk
To: volt-nuts@febo.com
Date: Fri, 11 May 2012 08:18:01 +0100
Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022

Hi,

Where can one buy the genuine used LTZ1000 without the welded on legs?

John

m k m1k3k1@hotmail.com writes:

Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too.

I will try and look at stocks over the weekend, but I dont think I have any of those.

MK

From: david.partridge@perdrix.co.uk
To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com
Date: Thu, 10 May 2012 20:15:17 +0100
Subject: [volt-nuts] WTB: OP16FJ or LT1022

I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter.

Ideally in TO99 metal can, but DIP8 if I can't get one in TO99

I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive.

I also know that there are some OP16s on eBay, but they too are rather costly.

Is anyone able to help?

Regards,
David Partridge

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

--

John Devereux

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

--

John Devereux

Yes I saw that one, that was posted here. In fact I was hoping for a recommendation from him (or others). New LTZ1000CH seem to be unavailable at present. John m k <m1k3k1@hotmail.com> writes: > Caveat Emptor, > > It was on a newsgroup post or a forum post where a Chinese member explained the various forms of trckery and provided pics of each type of fudge as well as genuine ones. Some are just banged out of a hot PCB in India by poor labour on less than a dollar a day pay from scrap equipment. > > M K > >> From: john@devereux.me.uk >> To: volt-nuts@febo.com >> Date: Fri, 11 May 2012 08:18:01 +0100 >> Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022 >> >> >> Hi, >> >> Where can one buy the genuine used LTZ1000 without the welded on legs? >> >> John >> >> m k <m1k3k1@hotmail.com> writes: >> >> > Watch the ebay opamps, some of the LTZ1000's for instance are second hand, but have "new" legs welded on to make them look unused, the same thing happens with other devices too. >> > >> > I will try and look at stocks over the weekend, but I dont think I have any of those. >> > >> > MK >> > >> >> From: david.partridge@perdrix.co.uk >> >> To: volt-nuts@febo.com; TekScopes@yahoogroups.com; TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com >> >> Date: Thu, 10 May 2012 20:15:17 +0100 >> >> Subject: [volt-nuts] WTB: OP16FJ or LT1022 >> >> >> >> I'm looking for an OP16FJ or LT1022 (which I think would make an OK replacement) to repair a 7081 meter. >> >> >> >> Ideally in TO99 metal can, but DIP8 if I can't get one in TO99 >> >> >> >> I'm aware that I can buy LT1022 in DIP8 direct from Linear Technology, but they want about $40 to ship them to me which make them rather expensive. >> >> >> >> I also know that there are some OP16s on eBay, but they too are rather costly. >> >> >> >> Is anyone able to help? >> >> >> >> Regards, >> >> David Partridge >> >> >> >> >> >> _______________________________________________ >> >> volt-nuts mailing list -- volt-nuts@febo.com >> >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> >> and follow the instructions there. >> > >> > _______________________________________________ >> > volt-nuts mailing list -- volt-nuts@febo.com >> > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> > and follow the instructions there. >> > >> >> -- >> >> John Devereux >> >> _______________________________________________ >> volt-nuts mailing list -- volt-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > -- John Devereux

T

The-al-bundy@home.nl

Sat, May 12, 2012 7:32 AM

I've got a brand new (un-cut) LTZ1000CH which I don't use. So if anyone is
interested please contact me.

Bram

----- Original Message -----
From: "John Devereux" john@devereux.me.uk
To: volt-nuts@febo.com
Sent: Saturday, May 12, 2012 9:00 AM
Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022

Yes I saw that one, that was posted here. In fact I was hoping for a
recommendation from him (or others).

New LTZ1000CH seem to be unavailable at present.

John

m k m1k3k1@hotmail.com writes:

Caveat Emptor,

It was on a newsgroup post or a forum post where a Chinese member
explained the various forms of trckery and provided pics of each type of
fudge as well as genuine ones. Some are just banged out of a hot PCB in
India by poor labour on less than a dollar a day pay from scrap
equipment.

M K

From: john@devereux.me.uk
To: volt-nuts@febo.com
Date: Fri, 11 May 2012 08:18:01 +0100
Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022

Hi,

Where can one buy the genuine used LTZ1000 without the welded on legs?

John

m k m1k3k1@hotmail.com writes:

Watch the ebay opamps, some of the LTZ1000's for instance are second
hand, but have "new" legs welded on to make them look unused, the same
thing happens with other devices too.

I will try and look at stocks over the weekend, but I dont think I
have any of those.

MK

From: david.partridge@perdrix.co.uk
To: volt-nuts@febo.com; TekScopes@yahoogroups.com;
TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com
Date: Thu, 10 May 2012 20:15:17 +0100
Subject: [volt-nuts] WTB: OP16FJ or LT1022

I'm looking for an OP16FJ or LT1022 (which I think would make an OK
replacement) to repair a 7081 meter.

Ideally in TO99 metal can, but DIP8 if I can't get one in TO99

I'm aware that I can buy LT1022 in DIP8 direct from Linear
Technology, but they want about $40 to ship them to me which make
them rather expensive.

I also know that there are some OP16s on eBay, but they too are
rather costly.

Is anyone able to help?

Regards,
David Partridge

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

--

John Devereux

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

--

John Devereux

volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

I've got a brand new (un-cut) LTZ1000CH which I don't use. So if anyone is interested please contact me. Bram ----- Original Message ----- From: "John Devereux" <john@devereux.me.uk> To: <volt-nuts@febo.com> Sent: Saturday, May 12, 2012 9:00 AM Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022 > > Yes I saw that one, that was posted here. In fact I was hoping for a > recommendation from him (or others). > > New LTZ1000CH seem to be unavailable at present. > > John > > m k <m1k3k1@hotmail.com> writes: > >> Caveat Emptor, >> >> It was on a newsgroup post or a forum post where a Chinese member >> explained the various forms of trckery and provided pics of each type of >> fudge as well as genuine ones. Some are just banged out of a hot PCB in >> India by poor labour on less than a dollar a day pay from scrap >> equipment. >> >> M K >> >>> From: john@devereux.me.uk >>> To: volt-nuts@febo.com >>> Date: Fri, 11 May 2012 08:18:01 +0100 >>> Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022 >>> >>> >>> Hi, >>> >>> Where can one buy the genuine used LTZ1000 without the welded on legs? >>> >>> John >>> >>> m k <m1k3k1@hotmail.com> writes: >>> >>> > Watch the ebay opamps, some of the LTZ1000's for instance are second >>> > hand, but have "new" legs welded on to make them look unused, the same >>> > thing happens with other devices too. >>> > >>> > I will try and look at stocks over the weekend, but I dont think I >>> > have any of those. >>> > >>> > MK >>> > >>> >> From: david.partridge@perdrix.co.uk >>> >> To: volt-nuts@febo.com; TekScopes@yahoogroups.com; >>> >> TekScopes2@yahoogroups.com; hp_agilent_equipment@yahoogroups.com >>> >> Date: Thu, 10 May 2012 20:15:17 +0100 >>> >> Subject: [volt-nuts] WTB: OP16FJ or LT1022 >>> >> >>> >> I'm looking for an OP16FJ or LT1022 (which I think would make an OK >>> >> replacement) to repair a 7081 meter. >>> >> >>> >> Ideally in TO99 metal can, but DIP8 if I can't get one in TO99 >>> >> >>> >> I'm aware that I can buy LT1022 in DIP8 direct from Linear >>> >> Technology, but they want about $40 to ship them to me which make >>> >> them rather expensive. >>> >> >>> >> I also know that there are some OP16s on eBay, but they too are >>> >> rather costly. >>> >> >>> >> Is anyone able to help? >>> >> >>> >> Regards, >>> >> David Partridge >>> >> >>> >> >>> >> _______________________________________________ >>> >> volt-nuts mailing list -- volt-nuts@febo.com >>> >> To unsubscribe, go to >>> >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >>> >> and follow the instructions there. >>> > >>> > _______________________________________________ >>> > volt-nuts mailing list -- volt-nuts@febo.com >>> > To unsubscribe, go to >>> > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >>> > and follow the instructions there. >>> > >>> >>> -- >>> >>> John Devereux >>> >>> _______________________________________________ >>> volt-nuts mailing list -- volt-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >>> and follow the instructions there. >> >> _______________________________________________ >> volt-nuts mailing list -- volt-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> and follow the instructions there. >> > > -- > > John Devereux > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

volt-nuts@lists.febo.com

WTB: OP16FJ or LT1022