Empathy List Archives

J

jon

Wed, May 31, 2023 12:14 PM

I am now using a recent snapshot, but the initial startup time for that
program is probably 5x longer than for older versions. If I then run the
recent snapshot again, it loads in a more reasonable time. Any plans to
reduce program load time?

I am now using a recent snapshot, but the initial startup time for that program is probably 5x longer than for older versions. If I then run the recent snapshot again, it loads in a more reasonable time. Any plans to reduce program load time?

NH

nop head

Wed, May 31, 2023 12:43 PM

Yes I have noticed slow startups. When I run the command line tests of
NopSCADlib the times I measure are at least 2 seconds longer than I get in
the GUI. I.e. it takes the command line 2 seconds to do nothing, which
seems excessive on a machine that runs from an SSD and presumably has the
executable cached after the first test.

On Wed, 31 May 2023 at 13:14, jon jon@jonbondy.com wrote:

I am now using a recent snapshot, but the initial startup time for that
program is probably 5x longer than for older versions. If I then run the
recent snapshot again, it loads in a more reasonable time. Any plans to
reduce program load time?

OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org

Yes I have noticed slow startups. When I run the command line tests of NopSCADlib the times I measure are at least 2 seconds longer than I get in the GUI. I.e. it takes the command line 2 seconds to do nothing, which seems excessive on a machine that runs from an SSD and presumably has the executable cached after the first test. On Wed, 31 May 2023 at 13:14, jon <jon@jonbondy.com> wrote: > I am now using a recent snapshot, but the initial startup time for that > program is probably 5x longer than for older versions. If I then run the > recent snapshot again, it loads in a more reasonable time. Any plans to > reduce program load time? > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >

TP

Torsten Paul

Sat, Jun 3, 2023 5:35 PM

On 31.05.23 14:14, jon wrote:

I am now using a recent snapshot, but the initial startup time
for that program is probably 5x longer than for older versions.

I see no visible difference whatsoever between the release 2021.01
and snapshot version 2023.05.19. Both start in less than a second
to an empty editor window on my old underclocked notebook. This is
on Debian using the native packages.

ciao,
Torsten.

On 31.05.23 14:14, jon wrote: > I am now using a recent snapshot, but the initial startup time > for that program is probably 5x longer than for older versions. I see no visible difference whatsoever between the release 2021.01 and snapshot version 2023.05.19. Both start in less than a second to an empty editor window on my old underclocked notebook. This is on Debian using the native packages. ciao, Torsten.

J

jon

Mon, Jun 5, 2023 1:05 PM

Torsten:

And now I cannot reproduce this. Sorry for the false alarm. Maybe a
hard disk spinup time that I was not aware of.

Jon

On 6/3/2023 1:35 PM, Torsten Paul wrote:

On 31.05.23 14:14, jon wrote:

I am now using a recent snapshot, but the initial startup time
for that program is probably 5x longer than for older versions.

I see no visible difference whatsoever between the release 2021.01
and snapshot version 2023.05.19. Both start in less than a second
to an empty editor window on my old underclocked notebook. This is
on Debian using the native packages.

ciao,
Torsten.

OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org

Torsten: And now I cannot reproduce this. Sorry for the false alarm. Maybe a hard disk spinup time that I was not aware of. Jon On 6/3/2023 1:35 PM, Torsten Paul wrote: > On 31.05.23 14:14, jon wrote: >> I am now using a recent snapshot, but the initial startup time >> for that program is probably 5x longer than for older versions. > > I see no visible difference whatsoever between the release 2021.01 > and snapshot version 2023.05.19. Both start in less than a second > to an empty editor window on my old underclocked notebook. This is > on Debian using the native packages. > > ciao, > Torsten. > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org

J

jon

Wed, Jun 7, 2023 6:19 PM

Torsten:

Now I recall the problem.

When I start the 2021.01 release and click New, it takes 2 seconds
before OpenSCAD comes up and is available.

When I do this with 2023.05.05, it takes 13 seconds before the form
appears and an additional 8 seconds before I can actually use OpenSCAD.

Jon

On 6/5/2023 9:05 AM, jon wrote:

Torsten:

And now I cannot reproduce this. Sorry for the false alarm. Maybe a
hard disk spinup time that I was not aware of.

Jon

On 6/3/2023 1:35 PM, Torsten Paul wrote:

On 31.05.23 14:14, jon wrote:

I am now using a recent snapshot, but the initial startup time
for that program is probably 5x longer than for older versions.

I see no visible difference whatsoever between the release 2021.01
and snapshot version 2023.05.19. Both start in less than a second
to an empty editor window on my old underclocked notebook. This is
on Debian using the native packages.

ciao,
Torsten.

OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org

OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org

Torsten: Now I recall the problem. When I start the 2021.01 release and click New, it takes 2 seconds before OpenSCAD comes up and is available. When I do this with 2023.05.05, it takes 13 seconds before the form appears and an additional 8 seconds before I can actually use OpenSCAD. Jon On 6/5/2023 9:05 AM, jon wrote: > Torsten: > > And now I cannot reproduce this. Sorry for the false alarm. Maybe a > hard disk spinup time that I was not aware of. > > Jon > > > On 6/3/2023 1:35 PM, Torsten Paul wrote: >> On 31.05.23 14:14, jon wrote: >>> I am now using a recent snapshot, but the initial startup time >>> for that program is probably 5x longer than for older versions. >> >> I see no visible difference whatsoever between the release 2021.01 >> and snapshot version 2023.05.19. Both start in less than a second >> to an empty editor window on my old underclocked notebook. This is >> on Debian using the native packages. >> >> ciao, >> Torsten. >> _______________________________________________ >> OpenSCAD mailing list >> To unsubscribe send an email to discuss-leave@lists.openscad.org > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org

J

jon

Fri, Jun 9, 2023 4:46 PM

I just opened a Recent SCAD file in 2023.05.05 and it took 19 seconds
before I could start working on the file. This on an 8 core
[irrelevant!] 4 GHz processor

Jon

On 6/7/2023 2:19 PM, jon wrote:

Torsten:

Now I recall the problem.

When I start the 2021.01 release and click New, it takes 2 seconds
before OpenSCAD comes up and is available.

When I do this with 2023.05.05, it takes 13 seconds before the form
appears and an additional 8 seconds before I can actually use OpenSCAD.

Jon

On 6/5/2023 9:05 AM, jon wrote:

Torsten:

And now I cannot reproduce this. Sorry for the false alarm. Maybe a
hard disk spinup time that I was not aware of.

Jon

On 6/3/2023 1:35 PM, Torsten Paul wrote:

On 31.05.23 14:14, jon wrote:

I am now using a recent snapshot, but the initial startup time
for that program is probably 5x longer than for older versions.

I see no visible difference whatsoever between the release 2021.01
and snapshot version 2023.05.19. Both start in less than a second
to an empty editor window on my old underclocked notebook. This is
on Debian using the native packages.

ciao,
Torsten.

OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org

OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org

I just opened a Recent SCAD file in 2023.05.05 and it took 19 seconds before I could start working on the file. This on an 8 core [irrelevant!] 4 GHz processor Jon On 6/7/2023 2:19 PM, jon wrote: > Torsten: > > Now I recall the problem. > > When I start the 2021.01 release and click New, it takes 2 seconds > before OpenSCAD comes up and is available. > > When I do this with 2023.05.05, it takes 13 seconds before the form > appears and an additional 8 seconds before I can actually use OpenSCAD. > > Jon > > > > On 6/5/2023 9:05 AM, jon wrote: > >> Torsten: >> >> And now I cannot reproduce this. Sorry for the false alarm. Maybe a >> hard disk spinup time that I was not aware of. >> >> Jon >> >> >> On 6/3/2023 1:35 PM, Torsten Paul wrote: >>> On 31.05.23 14:14, jon wrote: >>>> I am now using a recent snapshot, but the initial startup time >>>> for that program is probably 5x longer than for older versions. >>> >>> I see no visible difference whatsoever between the release 2021.01 >>> and snapshot version 2023.05.19. Both start in less than a second >>> to an empty editor window on my old underclocked notebook. This is >>> on Debian using the native packages. >>> >>> ciao, >>> Torsten. >>> _______________________________________________ >>> OpenSCAD mailing list >>> To unsubscribe send an email to discuss-leave@lists.openscad.org >> _______________________________________________ >> OpenSCAD mailing list >> To unsubscribe send an email to discuss-leave@lists.openscad.org

discuss@lists.openscad.org

startup time for latest snapshos