Hi I want to modify X310 HW somehow to remove all RX channels and implement 8 TX channels, with max 50 MHz BW, as I figured out the easiest way would be removing existing 2 DACs and 2 ADCs and adding 8 x AD9364 RF Agile Transceivers. As I'm not expert in HW design, is there any company or individual (including Ettus) that could do it for me?

That would definitely not be easier than building your own AD936x board. Best regards, Marcus On 07/15/2016 05:53 PM, hossein talaiee via USRP-users wrote: > Hi > > I want to modify X310 HW somehow to remove all RX channels and > implement 8 TX channels, with max 50 MHz BW, as I figured out the > easiest way would be removing existing 2 DACs and 2 ADCs and adding 8 > x AD9364 RF Agile Transceivers. > > As I'm not expert in HW design, is there any company or individual > (including Ettus) that could do it for me? > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Is there any well known company to do it as fast as possible for me? like less than 3 month (Hardware only)? What I need on my board: > KINTEX 7 410T > 8 x AD9364 > OCXO + GPSDO + GPS SYNC > 8 GB DDR3 RAM > 2 x 10GB Ethernet On Fri, Jul 15, 2016 at 8:36 PM, Marcus Müller <usrp-users@lists.ettus.com> wrote: > That would definitely not be easier than building your own AD936x board. > > Best regards, > Marcus > > > On 07/15/2016 05:53 PM, hossein talaiee via USRP-users wrote: > > Hi > > I want to modify X310 HW somehow to remove all RX channels and implement 8 > TX channels, with max 50 MHz BW, as I figured out the easiest way would be > removing existing 2 DACs and 2 ADCs and adding 8 x AD9364 RF Agile > Transceivers. > > As I'm not expert in HW design, is there any company or individual > (including Ettus) that could do it for me? > > > _______________________________________________ > USRP-users mailing listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >

At the risk of being a nay-sayer (substitute your favourite phrase instead)… Anyone who has ever built a comparable multi-layer board will tell you that a one-off board in 3 months is highly unlikely. A company willing to take it on will charge a lot of money (think > $US30,000) and insist on no guarantees for performance specs. For example, putting 8 AD9364s on one board and operating them all possible mode combinations scares the heck out of me ;-) This is just my opinion, one based on being bullied into trying to build HW in such a time frame in the past… Sorry if this is not the answer you are looking for. I suggest you consider modifying your requirements, or explain to your supervisor that what is being asked for is not possible without compromising cost and risk estimates. best regards, steven Steven Knudsen, Ph.D., P.Eng. www. techconficio.ca www.linkedin.com/in/knudstevenknudsen All the wires are cut, my friends Live beyond the severed ends. Louis MacNeice > On Jul 15, 2016, at 10:14, hossein talaiee via USRP-users <usrp-users@lists.ettus.com> wrote: > > Is there any well known company to do it as fast as possible for me? like less than 3 month (Hardware only)? > > What I need on my board: > > KINTEX 7 410T > > 8 x AD9364 > > OCXO + GPSDO + GPS SYNC > > 8 GB DDR3 RAM > > 2 x 10GB Ethernet > > > > > On Fri, Jul 15, 2016 at 8:36 PM, Marcus Müller <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote: > That would definitely not be easier than building your own AD936x board. > > Best regards, > Marcus > > > On 07/15/2016 05:53 PM, hossein talaiee via USRP-users wrote: >> Hi >> >> I want to modify X310 HW somehow to remove all RX channels and implement 8 TX channels, with max 50 MHz BW, as I figured out the easiest way would be removing existing 2 DACs and 2 ADCs and adding 8 x AD9364 RF Agile Transceivers. >> >> As I'm not expert in HW design, is there any company or individual (including Ettus) that could do it for me? >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com> >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com> > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com> > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com