I just spoke with Fluke about calibration options for the 732A and how to connect an external battery pack. There are three calibration options: 1. Z540 $700 2. Accredited $1000 3. Primary Standards Lab $1485 These are described on their website: http://us.flukecal.com/support/calibration-services/electrical-rf The Fluke part number for the male plug to connect to the socket on the back of the battery module, 732A-7005, is 2181497 and is available for $12.75. I ordered two. With that, I can construct a transit case with room for external batteries and be able to ship it overnight to Fluke for calibration. The folks in calibration service suggested I send them an email requesting the value of the Thermistor and whether old/original calibration certificates might still be available and they would forward it to the folks that, at one time, were in charge of keeping that information. At one time, that information was kept but, according to them, no one wanted it. Therefore, they no longer keep that information. However, perhaps it might be available for this 'vintage' equipment. We'll see. Thanks to all for their help. Joe

I just received the last couple of missing pages from my manual and uploaded it. I deleted two uploads that are now redundant and was able to scan the schematics with a large format scanner. Everything should be a lot easier to read now. Todd

Todd, Looking forward to the 7332A/AN manual but where did you upload it? I looked on Didier's site but did not see anything that looked related to the 732A/AN. Thanks. Joe -----Original Message----- From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On Behalf Of T. Micallef Sent: Monday, January 06, 2014 12:38 PM To: volt-nuts@febo.com Subject: [volt-nuts] Fluke 732A/AN Manual I just received the last couple of missing pages from my manual and uploaded it. I deleted two uploads that are now redundant and was able to scan the schematics with a large format scanner. Everything should be a lot easier to read now. Todd _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.

Not to steal Todd's thunder but you can find these files on Didier's

Joe: Not to steal Todd's thunder but you can find these files on Didier's "ftp" site and you can download them from there until he gets a chance to place them on his regular website. I have already got them and they are just like the manual I have. Great job Todd! This is the first time I have seen the latest manual on the 732A/AN. I was thinking about doing this but I don't have a great scanner and it takes time to scan a manual like this. He even has the schematics in "B" size. ftp.ko4bb.com username u47755086-manuals password manuals Bill ----- Original Message ----- From: "J. L. Trantham" <jltran@att.net> To: "'Discussion of precise voltage measurement'" <volt-nuts@febo.com> Sent: Monday, January 06, 2014 7:57 PM Subject: Re: [volt-nuts] Fluke 732A/AN Manual > Todd, > > Looking forward to the 7332A/AN manual but where did you upload it? > > I looked on Didier's site but did not see anything that looked related to > the 732A/AN. > > Thanks. > > Joe > > -----Original Message----- > From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On > Behalf Of T. Micallef > Sent: Monday, January 06, 2014 12:38 PM > To: volt-nuts@febo.com > Subject: [volt-nuts] Fluke 732A/AN Manual > > I just received the last couple of missing pages from my manual and uploaded > it. > > I deleted two uploads that are now redundant and was able to scan the > schematics with a large format scanner. Everything should be a lot easier to > read now. > > Todd > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

Not to steal Todd's thunder but you can find these files on Didier's

Bill, Thanks. Got it. It helps to read the 'fine print'. Thanks again to you and Todd. Joe -----Original Message----- From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On Behalf Of Bill Gold Sent: Tuesday, January 07, 2014 8:06 AM To: Discussion of precise voltage measurement Subject: Re: [volt-nuts] Fluke 732A/AN Manual Joe: Not to steal Todd's thunder but you can find these files on Didier's "ftp" site and you can download them from there until he gets a chance to place them on his regular website. I have already got them and they are just like the manual I have. Great job Todd! This is the first time I have seen the latest manual on the 732A/AN. I was thinking about doing this but I don't have a great scanner and it takes time to scan a manual like this. He even has the schematics in "B" size. ftp.ko4bb.com username u47755086-manuals password manuals Bill ----- Original Message ----- From: "J. L. Trantham" <jltran@att.net> To: "'Discussion of precise voltage measurement'" <volt-nuts@febo.com> Sent: Monday, January 06, 2014 7:57 PM Subject: Re: [volt-nuts] Fluke 732A/AN Manual > Todd, > > Looking forward to the 7332A/AN manual but where did you upload it? > > I looked on Didier's site but did not see anything that looked related to > the 732A/AN. > > Thanks. > > Joe > > -----Original Message----- > From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On > Behalf Of T. Micallef > Sent: Monday, January 06, 2014 12:38 PM > To: volt-nuts@febo.com > Subject: [volt-nuts] Fluke 732A/AN Manual > > I just received the last couple of missing pages from my manual and uploaded > it. > > I deleted two uploads that are now redundant and was able to scan the > schematics with a large format scanner. Everything should be a lot easier to > read now. > > Todd > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.