Hello there, I recently acquired an abandoned HP 3456A. The caps in the PSU had dried out. So I changed the caps. It is working. I am loving it. The construction is first class. I would like to show it some additional love by making sure it is in cal. I am wondering if there is anyone near where I am whom is able to help me out! :) I live in Oslo, Norway. Thank you for your time. Kind regards, Marius

Marius, I've had pretty good luck as in cost by approaching small labs if you do not want traceability, i.e. a sticker with a signature. One met lab that was near me, and sadly closed shop (we have gone from 5 in 1985 down to 1) would let the tech work on the side at his rate as long as the labs name never was used. He loved good microbrew beer. -pete On Fri, Feb 10, 2012 at 12:05 PM, Marius Jonsson <king.oslo@googlemail.com> wrote: > Hello there, > > I recently acquired an abandoned HP 3456A. The caps in the PSU had dried > out. So I changed the caps. It is working. I am loving it. The construction > is first class. > > I would like to show it some additional love by making sure it is in cal. I > am wondering if there is anyone near where I am whom is able to help me > out! :) > > I live in Oslo, Norway. > > Thank you for your time. > > Kind regards, > Marius > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

Pete, this is great advice, What is a met lab? Thank you for your time. Kind regards, Marius 2012/2/10 Pete Lancashire <pete@petelancashire.com> > Marius, > > I've had pretty good luck as in cost by approaching small labs if you > do not want traceability, i.e. a sticker with a signature. > > One met lab that was near me, and sadly closed shop (we have gone from > 5 in 1985 down to 1) would let the tech work > on the side at his rate as long as the labs name never was used. He > loved good microbrew beer. > > > -pete > > > On Fri, Feb 10, 2012 at 12:05 PM, Marius Jonsson > <king.oslo@googlemail.com> wrote: > > Hello there, > > > > I recently acquired an abandoned HP 3456A. The caps in the PSU had dried > > out. So I changed the caps. It is working. I am loving it. The > construction > > is first class. > > > > I would like to show it some additional love by making sure it is in > cal. I > > am wondering if there is anyone near where I am whom is able to help me > > out! :) > > > > I live in Oslo, Norway. > > > > Thank you for your time. > > > > Kind regards, > > Marius > > _______________________________________________ > > volt-nuts mailing list -- volt-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. >

Sorry for the shorthand, Metrology On Fri, Feb 10, 2012 at 12:28 PM, Marius Jonsson <king.oslo@googlemail.com> wrote: > Pete, this is great advice, > > What is a met lab? > > Thank you for your time. > > Kind regards, > Marius > > > > 2012/2/10 Pete Lancashire <pete@petelancashire.com> > >> Marius, >> >> I've had pretty good luck as in cost by approaching small labs if you >> do not want traceability, i.e. a sticker with a signature. >> >> One met lab that was near me, and sadly closed shop (we have gone from >> 5 in 1985 down to 1) would let the tech work >> on the side at his rate as long as the labs name never was used. He >> loved good microbrew beer. >> >> >> -pete >> >> >> On Fri, Feb 10, 2012 at 12:05 PM, Marius Jonsson >> <king.oslo@googlemail.com> wrote: >> > Hello there, >> > >> > I recently acquired an abandoned HP 3456A. The caps in the PSU had dried >> > out. So I changed the caps. It is working. I am loving it. The >> construction >> > is first class. >> > >> > I would like to show it some additional love by making sure it is in >> cal. I >> > am wondering if there is anyone near where I am whom is able to help me >> > out! :) >> > >> > I live in Oslo, Norway. >> > >> > Thank you for your time. >> > >> > Kind regards, >> > Marius >> > _______________________________________________ >> > volt-nuts mailing list -- volt-nuts@febo.com >> > To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> > and follow the instructions there. >> >> _______________________________________________ >> volt-nuts mailing list -- volt-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> and follow the instructions there. >> > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there.

Thanks Pete, Kind regards, Marius 2012/2/10 Pete Lancashire <pete@petelancashire.com> > Sorry for the shorthand, Metrology > > > On Fri, Feb 10, 2012 at 12:28 PM, Marius Jonsson > <king.oslo@googlemail.com> wrote: > > Pete, this is great advice, > > > > What is a met lab? > > > > Thank you for your time. > > > > Kind regards, > > Marius > > > > > > > > 2012/2/10 Pete Lancashire <pete@petelancashire.com> > > > >> Marius, > >> > >> I've had pretty good luck as in cost by approaching small labs if you > >> do not want traceability, i.e. a sticker with a signature. > >> > >> One met lab that was near me, and sadly closed shop (we have gone from > >> 5 in 1985 down to 1) would let the tech work > >> on the side at his rate as long as the labs name never was used. He > >> loved good microbrew beer. > >> > >> > >> -pete > >> > >> > >> On Fri, Feb 10, 2012 at 12:05 PM, Marius Jonsson > >> <king.oslo@googlemail.com> wrote: > >> > Hello there, > >> > > >> > I recently acquired an abandoned HP 3456A. The caps in the PSU had > dried > >> > out. So I changed the caps. It is working. I am loving it. The > >> construction > >> > is first class. > >> > > >> > I would like to show it some additional love by making sure it is in > >> cal. I > >> > am wondering if there is anyone near where I am whom is able to help > me > >> > out! :) > >> > > >> > I live in Oslo, Norway. > >> > > >> > Thank you for your time. > >> > > >> > Kind regards, > >> > Marius > >> > _______________________________________________ > >> > volt-nuts mailing list -- volt-nuts@febo.com > >> > To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > >> > and follow the instructions there. > >> > >> _______________________________________________ > >> volt-nuts mailing list -- volt-nuts@febo.com > >> To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > >> and follow the instructions there. > >> > > _______________________________________________ > > volt-nuts mailing list -- volt-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > > and follow the instructions there. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. >

Marius, In the US, Agilent lists Agilent Calibration Per Incident at $196.29. Is there an Agilent option in Norway? Joe -----Original Message----- From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On Behalf Of Marius Jonsson Sent: Friday, February 10, 2012 2:05 PM To: volt-nuts@febo.com Subject: Re: [volt-nuts] Help near Norway to get my HP 3456A into cal Hello there, I recently acquired an abandoned HP 3456A. The caps in the PSU had dried out. So I changed the caps. It is working. I am loving it. The construction is first class. I would like to show it some additional love by making sure it is in cal. I am wondering if there is anyone near where I am whom is able to help me out! :) I live in Oslo, Norway. Thank you for your time. Kind regards, Marius _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.

Thanks. I don't know. I will find out. Kind regards, Marius 2012/2/11 J. L. Trantham <jltran@att.net> > Marius, > > In the US, Agilent lists Agilent Calibration Per Incident at $196.29. > > Is there an Agilent option in Norway? > > Joe > > -----Original Message----- > From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On > Behalf Of Marius Jonsson > Sent: Friday, February 10, 2012 2:05 PM > To: volt-nuts@febo.com > Subject: Re: [volt-nuts] Help near Norway to get my HP 3456A into cal > > Hello there, > > I recently acquired an abandoned HP 3456A. The caps in the PSU had dried > out. So I changed the caps. It is working. I am loving it. The construction > is first class. > > I would like to show it some additional love by making sure it is in cal. I > am wondering if there is anyone near where I am whom is able to help me > out! :) > > I live in Oslo, Norway. > > Thank you for your time. > > Kind regards, > Marius > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. >