Re: [volt-nuts] VS330
Finally got to see it, thanks for making it available, its now online
via K04BB's site. Its very similar to its other voltage references
such as the MV106 but the best thing is its impressive voltage range
at ~30ppm/yr worse case accuracy.
At 12:32 AM 9/12/2013, Joseph Gray wrote:
I did finally get a manual for the EDC VS330 DC Voltage Standard from
Khron-Hite. I asked them if it was OK to upload it the the KO4BB site.
After two weeks and no reply, I figured they didn't care, so I uploaded it.
It should appear for download sometime soon.
Joe Gray
W5JG
Downloaded this pdf from KO4BB and my Adobe reader 6.0.6 - 01/08/2007 claims it is damaged and not
capable of opening.
Is this a case where Adobe is not backwards compatible and the KO4BB Adobe being too new for my
2007
edition?
Rolynn
I just downloaded it and had no problems opening the PDF. I stopped using
Adobe reader long ago, so can't comment on it. I currently use the free
Foxit reader.
Joe Gray
W5JG
On Sat, Sep 21, 2013 at 9:41 AM, RF PRECHTL K7DFW k7dfw@clatskanie.comwrote:
Downloaded this pdf from KO4BB and my Adobe reader 6.0.6 - 01/08/2007
claims it is damaged and not
capable of opening.
Is this a case where Adobe is not backwards compatible and the KO4BB Adobe
being too new for my
2007
edition?
Rolynn
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
Rolynn
The details say that the file was produced using Adobe 5.x so reading it
with Adobe 6 should not be a problem.
( There are backward compatibility issues with Adobe 7 and later which I
think you and I have labored with before) I am surprised you reader
says 2007 ..the base Adobe 6 engine was released 10 years ago in Nov
2003, any updates since then would have been for mostly for security
reasons not major operational adjustments. I forget ....you cant update
to a later Adobe Reader because your operating system is too old?
I downloaded the file and viewed it with both Adobe Reader 9 and 11 with
no problems
It is possible that your download is corrupt, erase and try again. Make
sure you are actually downloading the file and not trying to open it by
double clicking in a browser.. You download by right clicking and
"saving link as" or a similar term depending on your browser.
Dave
ArtekManuals.com
NR1DX
On 9/21/2013 10:41 AM, RF PRECHTL K7DFW wrote:
Downloaded this pdf from KO4BB and my Adobe reader 6.0.6 - 01/08/2007 claims it is damaged and not
capable of opening.
Is this a case where Adobe is not backwards compatible and the KO4BB Adobe being too new for my
2007
edition?
Rolynn
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
Yes. 7 or higher is required.
John K1AE
John Allen - PC Support Solutions www.pcsupportsolutions.com
PC On Site Service and Training - Computer HW/SW/Network debugging, installation
and upgrades.
mailto:john@pcsupportsolutions.com M: 508 361-6229
-----Original Message-----
From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On Behalf
Of RF PRECHTL K7DFW
Sent: Saturday, September 21, 2013 11:42 AM
To: Discussion of precise voltage measurement
Subject: Re: [volt-nuts] VS330
Downloaded this pdf from KO4BB and my Adobe reader 6.0.6 - 01/08/2007 claims it
is damaged and not
capable of opening.
Is this a case where Adobe is not backwards compatible and the KO4BB Adobe being
too new for my
2007
edition?
Rolynn
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
I do not use Acrobat, but the manual opens fine in the Fox it Reader
Didier KO4BB
RF PRECHTL K7DFW k7dfw@clatskanie.com wrote:
Downloaded this pdf from KO4BB and my Adobe reader 6.0.6 - 01/08/2007
claims it is damaged and not
capable of opening.
Is this a case where Adobe is not backwards compatible and the KO4BB
Adobe being too new for my
2007
edition?
Rolynn
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
--
Sent from my Motorola Droid Razr 4G LTE wireless tracker while I do other things.
Worked fine with Win7Pro and Adobe Reader X.
Joe
-----Original Message-----
From: volt-nuts-bounces@febo.com [mailto:volt-nuts-bounces@febo.com] On
Behalf Of Didier Juges
Sent: Saturday, September 21, 2013 5:13 PM
To: Discussion of precise voltage measurement
Subject: Re: [volt-nuts] VS330
I do not use Acrobat, but the manual opens fine in the Fox it Reader
Didier KO4BB
RF PRECHTL K7DFW k7dfw@clatskanie.com wrote:
Downloaded this pdf from KO4BB and my Adobe reader 6.0.6 - 01/08/2007
claims it is damaged and not capable of opening.
Is this a case where Adobe is not backwards compatible and the KO4BB
Adobe being too new for my
2007
edition?
Rolynn
volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
--
Sent from my Motorola Droid Razr 4G LTE wireless tracker while I do other
things.
volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.