Cleaning shorepower cords
Milt Baker Ex-AT34985 Bluewater IV https://groups.io/g/ATOG/profile/245520
16:12 #5369 https://groups.io/g/ATOG/message/5369
How do you clean your shorepower cords?
I've tried many "solutions" to getting yellow shorepower cables clean, but
hands-down the best has been Green Concepts 10 Graffiti Remover. Using the
recommended 1 part GR to 5 parts water, and scrubbing with a Scotch Brite
green pad, and rising frequently with a hose, virtually all the black and
brown stains disappeared. I was amazed at how effective this stuff was and
how little scrubbing it took.
http://ecoconceptsusa.com/product_10.html
Once the cord was clean and dry, I treated it with two coats of 303 Product
30306 Marine & Recreation Aerospace Protectant. Armor-All would probably
protect every bit a well, but the 303 seems to last longer.
One warning: be careful with the Graffiti remover. I made the mistake of
putting the container on dark Corian-style laminate and it left a light
colored circle that I haven't been able to remove.
Good luck,
Milt Baker, Nordhavn 47 Bluewater
What's a shore power cord? Is this something new... Jill's asking!
*Rudy & Jill Sechez *
*BRINEY BUG-a 34' Sail-Assisted Trawler *
*850-832-7748 *
St Michaels MD Chesapeake
Milt,
Try Marine Strip. Absolutely amazing.
https://themarinestrip.com/boat-cleaning-products/
Thanks,
Bob
Robert Calhoun Smith, Jr.
M/V MARY KATHRYN
Hatteras 58 LRC MTOA #4861
Annapolis, Maryland
On Fri, Aug 21, 2020 at 5:10 PM Milt Baker via Trawlers-and-Trawlering <
trawlers@lists.trawlering.com> wrote:
Cleaning shorepower cords
Milt Baker Ex-AT34985 Bluewater IV <
https://groups.io/g/ATOG/profile/245520>
16:12 #5369 https://groups.io/g/ATOG/message/5369
How do you clean your shorepower cords?
I've tried many "solutions" to getting yellow shorepower cables clean, but
hands-down the best has been Green Concepts 10 Graffiti Remover. Using the
recommended 1 part GR to 5 parts water, and scrubbing with a Scotch Brite
green pad, and rising frequently with a hose, virtually all the black and
brown stains disappeared. I was amazed at how effective this stuff was and
how little scrubbing it took.
http://ecoconceptsusa.com/product_10.html
Once the cord was clean and dry, I treated it with two coats of 303 Product
30306 Marine & Recreation Aerospace Protectant. Armor-All would probably
protect every bit a well, but the 303 seems to last longer.
One warning: be careful with the Graffiti remover. I made the mistake of
putting the container on dark Corian-style laminate and it left a light
colored circle that I haven't been able to remove.
Good luck,
Milt Baker, Nordhavn 47 Bluewater
http://lists.trawlering.com/mailman/listinfo/trawlers_lists.trawlering.com
To unsubscribe or modify your subscription options (get password, change
email address, etc) go to:
http://lists.trawlering.com/mailman/listinfo/trawlers_lists.trawlering.com
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.