Understood, and I too can get the same if I use gmail. But I've been using Forte's using Agent as my PC email client for over 30 years and in all other respects I far respects I far prefer it. And I strongly dislike gmail. After further research i think that Agent fails in this way because it does not support IMAP. On Thu, 20 Jul 2023 at 19:26, nop head <nop.head@gmail.com> wrote: > Yes but why do you need to? I use gmail and it shows my posts in between > others without needing to send and receive it. It is just there, where I > typed it. > > On Thu, 20 Jul 2023 at 18:07, Terry <terrypingm@gmail.com> wrote: > >> Yet I can send myself a gmail from my gmail address and I receive it in >> my Inbox. >> >> Terry >> >> >> On Wed, 19 Jul 2023 10:48:22 +0100, you wrote: >> >> >If you mean this " Thanks David. After watching that well made video I’m >> >envious of Blender users. Greatly expands potential for using >> Thingiverse, >> >given the high proportion without SCAD files. But adding ‘Learn Blender’ >> to >> >my to-do list would not be a wise move, I regret." then yes I saw it. >> > >> >The mailing list never sends back your own posts. I use gmail which >> >interleaves my own posts with those from the mailing list.It is just >> >the same as a normal email conversation, you don't expect the receiver to >> >echo back your posts. The email client interleaves them to form a thread. >> > >> >On Tue, 18 Jul 2023 at 22:16, Terry <terrypingm@gmail.com> wrote: >> > >> >> >> >> From my post about 13 hours ago, in the thread about STL editing ;: >> >> -------------------- >> >> "P.S. I sent an email for this thread earlier, replying to David, Tue, >> >> Jul 18, 2023 6:52 AM, which still doesn't appear in my inbox a few >> hours >> >> later. It does appear in Empathy. Could someone kindly let me know if >> it >> >> has arrived in their lists please?" >> >> -------------------- >> >> >> >> Any feedback please? >> >> >> >> Terry >> >> _______________________________________________ >> >> OpenSCAD mailing list >> >> To unsubscribe send an email to discuss-leave@lists.openscad.org >> >> >> _______________________________________________ >> OpenSCAD mailing list >> To unsubscribe send an email to discuss-leave@lists.openscad.org >> > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >

So what happens in Forte when you have a conversation with an individual rather than a mailing list? Do you see your own posts interleaved with their's? On Thu, 20 Jul 2023 at 23:02, Terry Pinnell <terrypingm@gmail.com> wrote: > Understood, and I too can get the same if I use gmail. But I've been using > Forte's using Agent as my PC email client for over 30 years and in all > other respects I far respects I far prefer it. And I strongly dislike > gmail. > > After further research i think that Agent fails in this way because it > does not support IMAP. > > On Thu, 20 Jul 2023 at 19:26, nop head <nop.head@gmail.com> wrote: > >> Yes but why do you need to? I use gmail and it shows my posts in between >> others without needing to send and receive it. It is just there, where I >> typed it. >> >> On Thu, 20 Jul 2023 at 18:07, Terry <terrypingm@gmail.com> wrote: >> >>> Yet I can send myself a gmail from my gmail address and I receive it in >>> my Inbox. >>> >>> Terry >>> >>> >>> On Wed, 19 Jul 2023 10:48:22 +0100, you wrote: >>> >>> >If you mean this " Thanks David. After watching that well made video I’m >>> >envious of Blender users. Greatly expands potential for using >>> Thingiverse, >>> >given the high proportion without SCAD files. But adding ‘Learn >>> Blender’ to >>> >my to-do list would not be a wise move, I regret." then yes I saw it. >>> > >>> >The mailing list never sends back your own posts. I use gmail which >>> >interleaves my own posts with those from the mailing list.It is just >>> >the same as a normal email conversation, you don't expect the receiver >>> to >>> >echo back your posts. The email client interleaves them to form a >>> thread. >>> > >>> >On Tue, 18 Jul 2023 at 22:16, Terry <terrypingm@gmail.com> wrote: >>> > >>> >> >>> >> From my post about 13 hours ago, in the thread about STL editing ;: >>> >> -------------------- >>> >> "P.S. I sent an email for this thread earlier, replying to David, Tue, >>> >> Jul 18, 2023 6:52 AM, which still doesn't appear in my inbox a few >>> hours >>> >> later. It does appear in Empathy. Could someone kindly let me know if >>> it >>> >> has arrived in their lists please?" >>> >> -------------------- >>> >> >>> >> Any feedback please? >>> >> >>> >> Terry >>> >> _______________________________________________ >>> >> OpenSCAD mailing list >>> >> To unsubscribe send an email to discuss-leave@lists.openscad.org >>> >> >>> _______________________________________________ >>> OpenSCAD mailing list >>> To unsubscribe send an email to discuss-leave@lists.openscad.org >>> >> _______________________________________________ >> OpenSCAD mailing list >> To unsubscribe send an email to discuss-leave@lists.openscad.org >> > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >

On Fri, 2023-07-21 at 13:06 +0100, nop head wrote: > So what happens in Forte when you have a conversation with an > individual rather than a mailing list? Do you see your own posts > interleaved with their's? Of course! Terry, try sending to the list,and CCing to someone else (me, if you want). > On Thu, 20 Jul 2023 at 23:02, Terry Pinnell <terrypingm@gmail.com> > wrote: > > Understood, and I too can get the same if I use gmail. But I've > > been using Forte's using Agent as my PC email client for over 30 > > years and in all other respects I far respects I far prefer it. And > > I strongly dislike gmail.  > > > > After further research i think that Agent fails in this way because > > it does not support IMAP. > > > > On Thu, 20 Jul 2023 at 19:26, nop head <nop.head@gmail.com> wrote: > > > Yes but why do you need to? I use gmail and it shows my posts in > > > between others without needing to send and receive it. It is just > > > there, where I typed it. > > > > > > On Thu, 20 Jul 2023 at 18:07, Terry <terrypingm@gmail.com> wrote: > > > > Yet I can send myself a gmail from my gmail address and I > > > > receive it in > > > > my Inbox. > > > > > > > > Terry > > > > > > > > > > > > On Wed, 19 Jul 2023 10:48:22 +0100, you wrote: > > > > > > > > > If you mean this " Thanks David. After watching that well > > > > > made video I’m > > > > > envious of Blender users. Greatly expands potential for using > > > > > Thingiverse, > > > > > given the high proportion without SCAD files. But adding > > > > > ‘Learn Blender’ to > > > > > my to-do list would not be a wise move, I regret." then yes I > > > > > saw it. > > > > > > > > > > The mailing list never sends back your own posts. I use gmail > > > > > which > > > > > interleaves my own posts with those from the mailing list.It > > > > > is just > > > > > the same as a normal email conversation, you don't expect the > > > > > receiver to > > > > > echo back your posts. The email client interleaves them to > > > > > form a thread. > > > > > > > > > > On Tue, 18 Jul 2023 at 22:16, Terry <terrypingm@gmail.com> > > > > > wrote: > > > > > > > > > > > > > > > > > From my post about 13 hours ago, in the thread about STL > > > > > > editing ;: > > > > > > -------------------- > > > > > > "P.S. I sent an email for this thread earlier, replying to > > > > > > David, Tue, > > > > > > Jul 18, 2023 6:52 AM, which still doesn't appear in my > > > > > > inbox a few hours > > > > > > later. It does appear in Empathy. Could someone kindly let > > > > > > me know if it > > > > > > has arrived in their lists please?" > > > > > > -------------------- > > > > > > > > > > > > Any feedback please? > > > > > > > > > > > > Terry > > > > > > _______________________________________________ > > > > > > OpenSCAD mailing list > > > > > > To unsubscribe send an email to > > > > > > discuss-leave@lists.openscad.org > > > > > > > > > > _______________________________________________ > > > > OpenSCAD mailing list > > > > To unsubscribe send an email to > > > > discuss-leave@lists.openscad.org > > > _______________________________________________ > > > OpenSCAD mailing list > > > To unsubscribe send an email to discuss-leave@lists.openscad.org > > _______________________________________________ > > OpenSCAD mailing list > > To unsubscribe send an email to discuss-leave@lists.openscad.org > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org

This is intended as a reply to two posts, from you and Larry: nop head Fri, Jul 21, 2023 12:06 PM larry Fri, Jul 21, 2023 2:12 PM ...because neither have appeared in my OpenSCAD inbox folder. nop head: You were asking about what I see in Agent. Most of my incoming email appears in a folder imaginatively called Inbox, in familiar format. I have another folder called Sent. And, coming slightly back OT, one I've called 'OpenSCAD emails'. Filters route incoming mail appropriately. Attached is a screenshot of what I see now in the folder under discussion. Note that only seven emails on 'Any feedback' appear, yet 13 have been posted, as you can see on Empathy. Both tools share the common flaw of frequently splitting up a topic into several, making quick browsing unnecessarily difficult. -------------------- larry: Thanks for the offer but the issue is not "I can't see my posts". I can look in 'Sent' and/or in Empathy, and if I always remember, I can bcc to my BT address. My gripe is "I can't see them chronologically, in one place." Despite my affection for Agent, for OpenSCAD activity I think I'll switch to Gmail in my browser and select All Mail. Of course, a FORUM would suit me a lot better ;-) Terry ==================== On Thu, 20 Jul 2023 19:23:52 +0100, you wrote: >Yes but why do you need to? I use gmail and it shows my posts in between >others without needing to send and receive it. It is just there, where I >typed it. > >On Thu, 20 Jul 2023 at 18:07, Terry <terrypingm@gmail.com> wrote: > >> Yet I can send myself a gmail from my gmail address and I receive it in >> my Inbox. >> >> Terry >> >> >> On Wed, 19 Jul 2023 10:48:22 +0100, you wrote: >> >> >If you mean this " Thanks David. After watching that well made video I’m >> >envious of Blender users. Greatly expands potential for using Thingiverse, >> >given the high proportion without SCAD files. But adding ‘Learn Blender’ >> to >> >my to-do list would not be a wise move, I regret." then yes I saw it. >> > >> >The mailing list never sends back your own posts. I use gmail which >> >interleaves my own posts with those from the mailing list.It is just >> >the same as a normal email conversation, you don't expect the receiver to >> >echo back your posts. The email client interleaves them to form a thread. >> > >> >On Tue, 18 Jul 2023 at 22:16, Terry <terrypingm@gmail.com> wrote: >> > >> >> >> >> From my post about 13 hours ago, in the thread about STL editing ;: >> >> -------------------- >> >> "P.S. I sent an email for this thread earlier, replying to David, Tue, >> >> Jul 18, 2023 6:52 AM, which still doesn't appear in my inbox a few hours >> >> later. It does appear in Empathy. Could someone kindly let me know if it >> >> has arrived in their lists please?" >> >> -------------------- >> >> >> >> Any feedback please? >> >> >> >> Terry >> >> _______________________________________________ >> >> OpenSCAD mailing list >> >> To unsubscribe send an email to discuss-leave@lists.openscad.org >> >> >> _______________________________________________ >> OpenSCAD mailing list >> To unsubscribe send an email to discuss-leave@lists.openscad.org >>

I can't see any attachment, Does Agent not have a group by thread view? I don't understand why you expect your own posts echoed back from the mailserver. When you send to anybody else, they won't echo your posts, so do you never see your posts interleaved with the replies? In gmail you don't need to use the All Mail folder. My posts show in the inbox grouped by subject title until I archive them or delete them. Then I would have to look in All Mail or Bin. Before gmail I used Thunderbird and that had a group by thread option. On Sat, 22 Jul 2023 at 22:13, Terry <terrypingm@gmail.com> wrote: > This is intended as a reply to two posts, from you and Larry: > nop head > Fri, Jul 21, 2023 12:06 PM > > larry > Fri, Jul 21, 2023 2:12 PM > > ...because neither have appeared in my OpenSCAD inbox folder. > > nop head: You were asking about what I see in Agent. Most of my incoming > email appears in a folder imaginatively called Inbox, in familiar > format. I have another folder called Sent. And, coming slightly back OT, > one I've called 'OpenSCAD emails'. Filters route incoming mail > appropriately. > > Attached is a screenshot of what I see now in the folder under > discussion. Note that only seven emails on 'Any feedback' appear, yet 13 > have been posted, as you can see on Empathy. > > Both tools share the common flaw of frequently splitting up a topic into > several, making quick browsing unnecessarily difficult. > > -------------------- > > larry: Thanks for the offer but the issue is not "I can't see my posts". > I can look in 'Sent' and/or in Empathy, and if I always remember, I can > bcc to my BT address. My gripe is "I can't see them chronologically, in > one place." > > Despite my affection for Agent, for OpenSCAD activity I think I'll > switch to Gmail in my browser and select All Mail. > > Of course, a FORUM would suit me a lot better ;-) > > Terry > > ==================== > > > > On Thu, 20 Jul 2023 19:23:52 +0100, you wrote: > > >Yes but why do you need to? I use gmail and it shows my posts in between > >others without needing to send and receive it. It is just there, where I > >typed it. > > > >On Thu, 20 Jul 2023 at 18:07, Terry <terrypingm@gmail.com> wrote: > > > >> Yet I can send myself a gmail from my gmail address and I receive it in > >> my Inbox. > >> > >> Terry > >> > >> > >> On Wed, 19 Jul 2023 10:48:22 +0100, you wrote: > >> > >> >If you mean this " Thanks David. After watching that well made video > I’m > >> >envious of Blender users. Greatly expands potential for using > Thingiverse, > >> >given the high proportion without SCAD files. But adding ‘Learn > Blender’ > >> to > >> >my to-do list would not be a wise move, I regret." then yes I saw it. > >> > > >> >The mailing list never sends back your own posts. I use gmail which > >> >interleaves my own posts with those from the mailing list.It is just > >> >the same as a normal email conversation, you don't expect the receiver > to > >> >echo back your posts. The email client interleaves them to form a > thread. > >> > > >> >On Tue, 18 Jul 2023 at 22:16, Terry <terrypingm@gmail.com> wrote: > >> > > >> >> > >> >> From my post about 13 hours ago, in the thread about STL editing ;: > >> >> -------------------- > >> >> "P.S. I sent an email for this thread earlier, replying to David, > Tue, > >> >> Jul 18, 2023 6:52 AM, which still doesn't appear in my inbox a few > hours > >> >> later. It does appear in Empathy. Could someone kindly let me know > if it > >> >> has arrived in their lists please?" > >> >> -------------------- > >> >> > >> >> Any feedback please? > >> >> > >> >> Terry > >> >> _______________________________________________ > >> >> OpenSCAD mailing list > >> >> To unsubscribe send an email to discuss-leave@lists.openscad.org > >> >> > >> _______________________________________________ > >> OpenSCAD mailing list > >> To unsubscribe send an email to discuss-leave@lists.openscad.org > >> > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >

Does Gmail intelligently ignore successive levels of ‘Re:’? -- Terry On 22 Jul 2023, at 22:57, nop head <nop.head@gmail.com> wrote: My posts show in the inbox grouped by subject title until I archive them or delete them.

It only shows the original subject at the top of the thread but if I show the original message there is only one level of Re in all the subsequent messages in this thread. On Sat, 22 Jul 2023 at 23:35, terrypingm@gmail.com <terrypingm@gmail.com> wrote: > Does Gmail intelligently ignore successive levels of ‘Re:’? > > -- > Terry > > On 22 Jul 2023, at 22:57, nop head <nop.head@gmail.com> wrote: > > My posts show in the inbox grouped by subject title until I archive them > or delete them. > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org >