Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine
except I can't make the console window keep the text size and style I
set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console
window promptly changes to that setting. However, when I next start the
program the console window reverts back to it's default setting which is
far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine except I can't make the console window keep the text size and style I set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console window promptly changes to that setting. However, when I next start the program the console window reverts back to it's default setting which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
--
This email has been checked for viruses by AVG.
https://www.avg.com
Thanks Michael- in regedit, consoleFontFamily is Arial Black and
consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference when
I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that
behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
*From:*Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine
except I can't make the console window keep the text size and style I
set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console
window promptly changes to that setting. However, when I next start
the program the console window reverts back to it's default setting
which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at
the other.
Our job as parents is to teach them to control all three.
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
Virus-free. www.avg.com
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
OpenSCAD mailing list
To unsubscribe send an email todiscuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
And that font size problem pre-dates the update.
Was it always so, or was there an earlier version where it was normal?
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:59
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Thanks Michael- in regedit, consoleFontFamily is Arial Black and consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference when I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine except I can't make the console window keep the text size and style I set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console window promptly changes to that setting. However, when I next start the program the console window reverts back to it's default setting which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Virus-free. http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient www.avg.com
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
--
This email has been checked for viruses by AVG.
https://www.avg.com
Ken, I just put 2022.06.26.ci11957 on my W10 VM, it works normally for me.
Is the very small text in Arial Black, please try setting it to a visually distinctive font (eg IMPACT), to see if it also loses the font as well as the size.
From: Michael Marx [mailto:michael@marx.id.au]
Sent: Sat, 20 Aug 2022 13:14
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Re: Console window text size
And that font size problem pre-dates the update.
Was it always so, or was there an earlier version where it was normal?
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:59
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Thanks Michael- in regedit, consoleFontFamily is Arial Black and consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference when I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine except I can't make the console window keep the text size and style I set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console window promptly changes to that setting. However, when I next start the program the console window reverts back to it's default setting which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Virus-free. http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient www.avg.com
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
--
This email has been checked for viruses by AVG.
https://www.avg.com
Good thought, so I tried that and no, the small font is neither impact
nor arial black.
Interestingly, there is a very very brief flash of text as the console
window opens, which appears to be the arial black and bigger font size,
then it almost instantly re-writes to the small font. Makes me wonder if
windows is playing silly buggers, though why it would do that with just
one of the three openscad windows I use is beyond me.
On 2022-08-20 13:31, Michael Marx wrote:
Ken, I just put 2022.06.26.ci11957 on my W10 VM, it works normally for me.
Is the very small text in Arial Black, please try setting it to a
visually distinctive font (eg IMPACT), to see if it also loses the
font as well as the size.
*From:*Michael Marx [mailto:michael@marx.id.au]
Sent: Sat, 20 Aug 2022 13:14
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Re: Console window text size
And that font size problem pre-dates the update.
Was it always so, or was there an earlier version where it was normal?
*From:*Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:59
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Thanks Michael- in regedit, consoleFontFamily is Arial Black and
consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference
when I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that
behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
*From:*Ken [mailto:bats059@gmail.com mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine
except I can't make the console window keep the text size and style I
set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console
window promptly changes to that setting. However, when I next start
the program the console window reverts back to it's default setting
which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell
at the other.
Our job as parents is to teach them to control all three.
Virus-free. www.avg.com
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at
the other.
Our job as parents is to teach them to control all three.
OpenSCAD mailing list
To unsubscribe send an email todiscuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Sorry, forgot to answer this question- it has always been a problem for
me with openscad Michael- but I have only been using it for less than a
year.
On 2022-08-20 13:14, Michael Marx wrote:
And that font size problem pre-dates the update.
Was it always so, or was there an earlier version where it was normal?
*From:*Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:59
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Thanks Michael- in regedit, consoleFontFamily is Arial Black and
consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference
when I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that
behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
*From:*Ken [mailto:bats059@gmail.com mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine
except I can't make the console window keep the text size and style I
set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console
window promptly changes to that setting. However, when I next start
the program the console window reverts back to it's default setting
which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell
at the other.
Our job as parents is to teach them to control all three.
Virus-free. www.avg.com
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at
the other.
Our job as parents is to teach them to control all three.
OpenSCAD mailing list
To unsubscribe send an email todiscuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Hmmm...
Either a Qt bug, Font problem on your system, possibly display driver but not likely.
(this rings a faint bell, I'll do a bit of searching)
the three openscad windows
This is one OpenSCAD instance with undocked preview/editor/console?
Any difference if you dock them?
Please post the Help/Library-info.
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 14:27
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Good thought, so I tried that and no, the small font is neither impact nor arial black.
Interestingly, there is a very very brief flash of text as the console window opens, which appears to be the arial black and bigger font size, then it almost instantly re-writes to the small font. Makes me wonder if windows is playing silly buggers, though why it would do that with just one of the three openscad windows I use is beyond me.
On 2022-08-20 13:31, Michael Marx wrote:
Ken, I just put 2022.06.26.ci11957 on my W10 VM, it works normally for me.
Is the very small text in Arial Black, please try setting it to a visually distinctive font (eg IMPACT), to see if it also loses the font as well as the size.
From: Michael Marx [mailto:michael@marx.id.au]
Sent: Sat, 20 Aug 2022 13:14
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Re: Console window text size
And that font size problem pre-dates the update.
Was it always so, or was there an earlier version where it was normal?
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:59
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Thanks Michael- in regedit, consoleFontFamily is Arial Black and consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference when I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
From: Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine except I can't make the console window keep the text size and style I set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the console window promptly changes to that setting. However, when I next start the program the console window reverts back to it's default setting which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black and 16.
What am I missing to make the setting stick after a program restart?
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Virus-free. http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient www.avg.com
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
OpenSCAD mailing list
To unsubscribe send an email to discuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
--
This email has been checked for viruses by AVG.
https://www.avg.com
Yes, one openscad instance with undocked preview/editor/console.
I tried it with them docked, it initially opens with the console in my
prefered position, then moves it to a docked position.
With it back undocked again, it definitely briefly comes up with the
desired font & size then immediately resets to the default small font.
Here is the help/library-info:-
OpenSCAD Version: 2022.06.26.ci11957 (git ea8950bd3)
System information: Windows(TM) 10.0 SP 0.0 NTW 1 MSDN 724833 8 CPUs
23.97 GB RAM
User Agent: OpenSCAD/2022.06.26.ci11957 (git ea8950bd3) (Windows(TM)
10.0 SP 0.0 NTW 1 MSDN 724833)
Compiler: GCC "11.2.0" 64bit
MinGW build: MingW64
Debug build: No
Boost version: 1_78
Eigen version: 3.4.0
CGAL version, kernels: 5.4, Cartesian<Gmpq>, Extended_cartesian<Gmpq>, Epeck
OpenCSG version: OpenCSG 1.5.0
Qt version: 5.15.3
QScintilla version: 2.11.2
InputDrivers:
GLib version: 2.70.2
lodepng version: 20210627
libzip version: 1.5.2
fontconfig version: 2.14.0
freetype version: 2.12.0
harfbuzz version: 4.2.0
cairo version: 1.16.0
lib3mf version: 1.8.1
Features: fast-csg*, fast-csg-trust-corefinement, fast-csg-debug,
fast-csg-exact, fast-csg-exact-callbacks, fast-csg-remesh,
fast-csg-remesh-predictibly, roof, input-driver-dbus, lazy-union,
vertex-object-renderers, vertex-object-renderers-indexing,
vertex-object-renderers-direct, vertex-object-renderers-prealloc,
textmetrics, import-function, sort-stl
Application Path: C:/Program Files/OpenSCAD dev
Documents Path: C:\Users\user\Documents
User Documents Path: C:\Users\user\Documents
Resource Path: C:/Program Files/OpenSCAD dev
User Library Path: C:/Users/user/Documents/OpenSCAD/libraries
User Config Path: C:\Users\user\AppData\Local/OpenSCAD
Backup Path: C:/Users/user/Documents/OpenSCAD/backups
OPENSCADPATH: <not set>
OpenSCAD library path:
C:/Users/user/Documents/OpenSCAD/libraries
C:/Program Files/OpenSCAD dev\libraries
OPENSCAD_FONT_PATH: <not set>
OpenSCAD font path:
C:/WINDOWS/fonts
C:/Users/user/AppData/Local/Microsoft/Windows/Fonts
C:/Users/user/.local/share/fonts
C:/usr/local/share/fonts
C:/usr/share/fonts
C:/Users/user/.fonts
GLEW version: 2.1.0
OpenGL Version: 4.6.0 NVIDIA 456.71
GL Renderer: GeForce GTX 650 Ti/PCIe/SSE2
GL Vendor: NVIDIA Corporation
RGBA(8888), depth(24), stencil(8)
GL_ARB_framebuffer_object: yes
GL_EXT_framebuffer_object: yes
GL_EXT_packed_depth_stencil: yes
Qt graphics widget: QOpenGLWidget
QSurfaceFormat: RGBA(8888), depth(24), stencil(8)
GL Extensions:
GL_AMD_multi_draw_indirect
GL_AMD_seamless_cubemap_per_texture
GL_ARB_ES2_compatibility
GL_ARB_ES3_1_compatibility
GL_ARB_ES3_2_compatibility
GL_ARB_ES3_compatibility
GL_ARB_arrays_of_arrays
GL_ARB_base_instance
GL_ARB_bindless_texture
GL_ARB_blend_func_extended
GL_ARB_buffer_storage
GL_ARB_clear_buffer_object
GL_ARB_clear_texture
GL_ARB_clip_control
GL_ARB_color_buffer_float
GL_ARB_compatibility
GL_ARB_compressed_texture_pixel_storage
GL_ARB_compute_shader
GL_ARB_compute_variable_group_size
GL_ARB_conditional_render_inverted
GL_ARB_conservative_depth
GL_ARB_copy_buffer
GL_ARB_copy_image
GL_ARB_cull_distance
GL_ARB_debug_output
GL_ARB_depth_buffer_float
GL_ARB_depth_clamp
GL_ARB_depth_texture
GL_ARB_derivative_control
GL_ARB_direct_state_access
GL_ARB_draw_buffers
GL_ARB_draw_buffers_blend
GL_ARB_draw_elements_base_vertex
GL_ARB_draw_indirect
GL_ARB_draw_instanced
GL_ARB_enhanced_layouts
GL_ARB_explicit_attrib_location
GL_ARB_explicit_uniform_location
GL_ARB_fragment_coord_conventions
GL_ARB_fragment_layer_viewport
GL_ARB_fragment_program
GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader
GL_ARB_framebuffer_no_attachments
GL_ARB_framebuffer_object
GL_ARB_framebuffer_sRGB
GL_ARB_geometry_shader4
GL_ARB_get_program_binary
GL_ARB_get_texture_sub_image
GL_ARB_gl_spirv
GL_ARB_gpu_shader5
GL_ARB_gpu_shader_fp64
GL_ARB_gpu_shader_int64
GL_ARB_half_float_pixel
GL_ARB_half_float_vertex
GL_ARB_imaging
GL_ARB_indirect_parameters
GL_ARB_instanced_arrays
GL_ARB_internalformat_query
GL_ARB_internalformat_query2
GL_ARB_invalidate_subdata
GL_ARB_map_buffer_alignment
GL_ARB_map_buffer_range
GL_ARB_multi_bind
GL_ARB_multi_draw_indirect
GL_ARB_multisample
GL_ARB_multitexture
GL_ARB_occlusion_query
GL_ARB_occlusion_query2
GL_ARB_parallel_shader_compile
GL_ARB_pipeline_statistics_query
GL_ARB_pixel_buffer_object
GL_ARB_point_parameters
GL_ARB_point_sprite
GL_ARB_polygon_offset_clamp
GL_ARB_program_interface_query
GL_ARB_provoking_vertex
GL_ARB_query_buffer_object
GL_ARB_robust_buffer_access_behavior
GL_ARB_robustness
GL_ARB_sample_shading
GL_ARB_sampler_objects
GL_ARB_seamless_cube_map
GL_ARB_seamless_cubemap_per_texture
GL_ARB_separate_shader_objects
GL_ARB_shader_atomic_counter_ops
GL_ARB_shader_atomic_counters
GL_ARB_shader_ballot
GL_ARB_shader_bit_encoding
GL_ARB_shader_clock
GL_ARB_shader_draw_parameters
GL_ARB_shader_group_vote
GL_ARB_shader_image_load_store
GL_ARB_shader_image_size
GL_ARB_shader_objects
GL_ARB_shader_precision
GL_ARB_shader_storage_buffer_object
GL_ARB_shader_subroutine
GL_ARB_shader_texture_image_samples
GL_ARB_shader_texture_lod
GL_ARB_shading_language_100
GL_ARB_shading_language_420pack
GL_ARB_shading_language_include
GL_ARB_shading_language_packing
GL_ARB_shadow
GL_ARB_sparse_buffer
GL_ARB_sparse_texture
GL_ARB_spirv_extensions
GL_ARB_stencil_texturing
GL_ARB_sync
GL_ARB_tessellation_shader
GL_ARB_texture_barrier
GL_ARB_texture_border_clamp
GL_ARB_texture_buffer_object
GL_ARB_texture_buffer_object_rgb32
GL_ARB_texture_buffer_range
GL_ARB_texture_compression
GL_ARB_texture_compression_bptc
GL_ARB_texture_compression_rgtc
GL_ARB_texture_cube_map
GL_ARB_texture_cube_map_array
GL_ARB_texture_env_add
GL_ARB_texture_env_combine
GL_ARB_texture_env_crossbar
GL_ARB_texture_env_dot3
GL_ARB_texture_filter_anisotropic
GL_ARB_texture_float
GL_ARB_texture_gather
GL_ARB_texture_mirror_clamp_to_edge
GL_ARB_texture_mirrored_repeat
GL_ARB_texture_multisample
GL_ARB_texture_non_power_of_two
GL_ARB_texture_query_levels
GL_ARB_texture_query_lod
GL_ARB_texture_rectangle
GL_ARB_texture_rg
GL_ARB_texture_rgb10_a2ui
GL_ARB_texture_stencil8
GL_ARB_texture_storage
GL_ARB_texture_storage_multisample
GL_ARB_texture_swizzle
GL_ARB_texture_view
GL_ARB_timer_query
GL_ARB_transform_feedback2
GL_ARB_transform_feedback3
GL_ARB_transform_feedback_instanced
GL_ARB_transform_feedback_overflow_query
GL_ARB_transpose_matrix
GL_ARB_uniform_buffer_object
GL_ARB_vertex_array_bgra
GL_ARB_vertex_array_object
GL_ARB_vertex_attrib_64bit
GL_ARB_vertex_attrib_binding
GL_ARB_vertex_buffer_object
GL_ARB_vertex_program
GL_ARB_vertex_shader
GL_ARB_vertex_type_10f_11f_11f_rev
GL_ARB_vertex_type_2_10_10_10_rev
GL_ARB_viewport_array
GL_ARB_window_pos
GL_ATI_draw_buffers
GL_ATI_texture_float
GL_ATI_texture_mirror_once
GL_EXTX_framebuffer_mixed_formats
GL_EXT_Cg_shader
GL_EXT_abgr
GL_EXT_bgra
GL_EXT_bindable_uniform
GL_EXT_blend_color
GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate
GL_EXT_blend_minmax
GL_EXT_blend_subtract
GL_EXT_compiled_vertex_array
GL_EXT_depth_bounds_test
GL_EXT_direct_state_access
GL_EXT_draw_buffers2
GL_EXT_draw_instanced
GL_EXT_draw_range_elements
GL_EXT_fog_coord
GL_EXT_framebuffer_blit
GL_EXT_framebuffer_multisample
GL_EXT_framebuffer_multisample_blit_scaled
GL_EXT_framebuffer_object
GL_EXT_framebuffer_sRGB
GL_EXT_geometry_shader4
GL_EXT_gpu_program_parameters
GL_EXT_gpu_shader4
GL_EXT_import_sync_object
GL_EXT_memory_object
GL_EXT_memory_object_win32
GL_EXT_multi_draw_arrays
GL_EXT_multiview_texture_multisample
GL_EXT_multiview_timer_query
GL_EXT_packed_depth_stencil
GL_EXT_packed_float
GL_EXT_packed_pixels
GL_EXT_pixel_buffer_object
GL_EXT_point_parameters
GL_EXT_polygon_offset_clamp
GL_EXT_provoking_vertex
GL_EXT_rescale_normal
GL_EXT_secondary_color
GL_EXT_semaphore
GL_EXT_semaphore_win32
GL_EXT_separate_shader_objects
GL_EXT_separate_specular_color
GL_EXT_shader_image_load_store
GL_EXT_shader_integer_mix
GL_EXT_shadow_funcs
GL_EXT_stencil_two_side
GL_EXT_stencil_wrap
GL_EXT_texture3D
GL_EXT_texture_array
GL_EXT_texture_buffer_object
GL_EXT_texture_compression_dxt1
GL_EXT_texture_compression_latc
GL_EXT_texture_compression_rgtc
GL_EXT_texture_compression_s3tc
GL_EXT_texture_cube_map
GL_EXT_texture_edge_clamp
GL_EXT_texture_env_add
GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_integer
GL_EXT_texture_lod
GL_EXT_texture_lod_bias
GL_EXT_texture_mirror_clamp
GL_EXT_texture_object
GL_EXT_texture_sRGB
GL_EXT_texture_sRGB_R8
GL_EXT_texture_sRGB_decode
GL_EXT_texture_shadow_lod
GL_EXT_texture_shared_exponent
GL_EXT_texture_storage
GL_EXT_texture_swizzle
GL_EXT_timer_query
GL_EXT_transform_feedback2
GL_EXT_vertex_array
GL_EXT_vertex_array_bgra
GL_EXT_vertex_attrib_64bit
GL_EXT_win32_keyed_mutex
GL_EXT_window_rectangles
GL_IBM_rasterpos_clip
GL_IBM_texture_mirrored_repeat
GL_KHR_blend_equation_advanced
GL_KHR_context_flush_control
GL_KHR_debug
GL_KHR_no_error
GL_KHR_parallel_shader_compile
GL_KHR_robust_buffer_access_behavior
GL_KHR_robustness
GL_KHR_shader_subgroup
GL_KTX_buffer_region
GL_NVX_conditional_render
GL_NVX_gpu_memory_info
GL_NVX_gpu_multicast2
GL_NVX_linked_gpu_multicast
GL_NVX_multigpu_info
GL_NVX_nvenc_interop
GL_NVX_progress_fence
GL_NV_ES1_1_compatibility
GL_NV_ES3_1_compatibility
GL_NV_alpha_to_coverage_dither_control
GL_NV_bindless_multi_draw_indirect
GL_NV_bindless_multi_draw_indirect_count
GL_NV_bindless_texture
GL_NV_blend_equation_advanced
GL_NV_blend_square
GL_NV_command_list
GL_NV_compute_program5
GL_NV_conditional_render
GL_NV_copy_depth_to_color
GL_NV_copy_image
GL_NV_depth_buffer_float
GL_NV_depth_clamp
GL_NV_draw_texture
GL_NV_draw_vulkan_image
GL_NV_explicit_multisample
GL_NV_feature_query
GL_NV_fence
GL_NV_float_buffer
GL_NV_fog_distance
GL_NV_fragment_program
GL_NV_fragment_program2
GL_NV_fragment_program_option
GL_NV_framebuffer_multisample_coverage
GL_NV_geometry_shader4
GL_NV_gpu_multicast
GL_NV_gpu_program4
GL_NV_gpu_program4_1
GL_NV_gpu_program5
GL_NV_gpu_program5_mem_extended
GL_NV_gpu_program_fp64
GL_NV_gpu_shader5
GL_NV_half_float
GL_NV_internalformat_sample_query
GL_NV_light_max_exponent
GL_NV_multisample_coverage
GL_NV_multisample_filter_hint
GL_NV_occlusion_query
GL_NV_packed_depth_stencil
GL_NV_parameter_buffer_object
GL_NV_parameter_buffer_object2
GL_NV_path_rendering
GL_NV_pixel_data_range
GL_NV_point_sprite
GL_NV_primitive_restart
GL_NV_query_resource
GL_NV_query_resource_tag
GL_NV_register_combiners
GL_NV_register_combiners2
GL_NV_shader_atomic_counters
GL_NV_shader_atomic_float
GL_NV_shader_buffer_load
GL_NV_shader_storage_buffer_object
GL_NV_shader_subgroup_partitioned
GL_NV_shader_thread_group
GL_NV_shader_thread_shuffle
GL_NV_texgen_reflection
GL_NV_texture_barrier
GL_NV_texture_compression_vtc
GL_NV_texture_env_combine4
GL_NV_texture_multisample
GL_NV_texture_rectangle
GL_NV_texture_rectangle_compressed
GL_NV_texture_shader
GL_NV_texture_shader2
GL_NV_texture_shader3
GL_NV_transform_feedback
GL_NV_transform_feedback2
GL_NV_uniform_buffer_unified_memory
GL_NV_vertex_array_range
GL_NV_vertex_array_range2
GL_NV_vertex_attrib_integer_64bit
GL_NV_vertex_buffer_unified_memory
GL_NV_vertex_program
GL_NV_vertex_program1_1
GL_NV_vertex_program2
GL_NV_vertex_program2_option
GL_NV_vertex_program3
GL_OVR_multiview
GL_OVR_multiview2
GL_S3_s3tc
GL_SGIS_generate_mipmap
GL_SGIS_texture_lod
GL_SGIX_depth_texture
GL_SGIX_shadow
GL_SUN_slice_accum
GL_WIN_swap_hint
WGL_EXT_swap_control
On 2022-08-20 14:38, Michael Marx wrote:
Hmmm...
Either a Qt bug, Font problem on your system, possibly display driver
but not likely.
(this rings a faint bell, I'll do a bit of searching)
the three openscad windows
This is one OpenSCAD instance with undocked preview/editor/console?
Any difference if you dock them?
Please post the Help/Library-info.
*From:*Ken [mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 14:27
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Good thought, so I tried that and no, the small font is neither impact
nor arial black.
Interestingly, there is a very very brief flash of text as the console
window opens, which appears to be the arial black and bigger font
size, then it almost instantly re-writes to the small font. Makes me
wonder if windows is playing silly buggers, though why it would do
that with just one of the three openscad windows I use is beyond me.
On 2022-08-20 13:31, Michael Marx wrote:
Ken, I just put 2022.06.26.ci11957 on my W10 VM, it works normally
for me.
Is the very small text in Arial Black, please try setting it to a
visually distinctive font (eg IMPACT), to see if it also loses the
font as well as the size.
*From:*Michael Marx [mailto:michael@marx.id.au
mailto:michael@marx.id.au]
Sent: Sat, 20 Aug 2022 13:14
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Re: Console window text size
And that font size problem pre-dates the update.
Was it always so, or was there an earlier version where it was normal?
*From:*Ken [mailto:bats059@gmail.com mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:59
To: discuss@lists.openscad.org
Subject: [OpenSCAD] Re: Console window text size
Thanks Michael- in regedit, consoleFontFamily is Arial Black and
consoleFontSize is 16 decimal, 10 hex.
I directly edited it to 22 (decimal), it didn't make any difference
when I started Openscad, still the same very small text.
I have the editor window set to the same, Arial Black and 16, that
behaves itself nicely.
On 2022-08-20 12:27, Michael Marx wrote:
Have a look in Regedit
HKEY_CURRENT_USER\Software\OpenSCAD\OpenSCAD\advanced\consoleFontFamily
*From:*Ken [mailto:bats059@gmail.com mailto:bats059@gmail.com]
Sent: Sat, 20 Aug 2022 12:08
To: 'OpenSCAD general discussion'
Subject: [OpenSCAD] Console window text size
I'm running version 2022.06.26.ci11957 on windows 10, all works fine
except I can't make the console window keep the text size and style
I set next time I restart the program.
In settings-advanced, I set it to Ariel black and 16, and the
console window promptly changes to that setting. However, when I
next start the program the console window reverts back to it's
default setting which is far too small for my eyes to read.
When I go back in to settings-advanced, it still says Arial black
and 16.
What am I missing to make the setting stick after a program restart?
OpenSCAD mailing list
To unsubscribe send an email todiscuss-leave@lists.openscad.org
--
Cheers, Ken
bats059@gmail.com
https://vk7krj.com/running.html
https://sstv.vk7krj.com/all_bands.html
A baby can be defined as an ego with a noise at one end and a smell at the other.
Our job as parents is to teach them to control all three.
Data points for me:
2021.01 (release) - there is no preference control. You can adjust the
size using Ctrl+Scrollwheel, but it is reset on restart.
2022.03.22 (daily) - there is a preference and it seems to persist.
Changing with Ctrl+Scrollwheel does not seem to persist.
2022.07.27 (personal build) - As in 2022.03.22.
Ctrl+Scrollwheel does not seem to change the value visible in the
preferences.