I estimate that it was 20 feet high, but it sure looked higher. I reached shore five hours later. The water was 55 degrees. My advice, stay in the marked ship channel if the tide is ebbing and there is ANY sea swell. Bill and Stella Kimley Seahorse Marine, Zhuhai China Tel# 86-756-550-2145 Fax# 86-756-333-5901 www.SeahorseYachts.com

Estimated delivery time one month or longer. Shipping and handling extra. Supply limited to first 1000 orders. Zeke Anderson PT38 Texas Cookin' Rockport TX

Hudson was made at a commercial sign shop - at much more reasonable cost than any estimate provided by " marine " sources --- ain't it always the way !! All the Best Ken Mrs. Hudson

It says: You can: Predict Storm Direction Predict Estimated Time of Arrival (ETA) to your location Measure Storm Speed in MPH, KMH, or Knots Measure distances directly on the screen in miles or kilometers Show Latitude and Longitude of any location Plot Markers at locations to mark points of interest or storm progress See current weather station data and

The price of the hydraulic drive is unlisted, but I estimate that the cost of better quality components from a supplier like McMaster to be in excess of $3000, probably closer to $4000. The price of an electrical drive is $7700. An additional traction battery for short periods of powering without running the engine is $597.

Based on wind and wave numbers from the buoys off Cape Blanco and Stonewall bank, I estimate the boat went over sometime between 0300 and 1200 on Dec 11, somewhere between Coquille River and Coos Bay. This is only an educated guess. Conditions peaked around 0900 on that date in that area with 30+ foot seas.

Estimated arrival: first week in November (via Air Mail)

She's hauled out in Richmond, CA; yard manager estimates two months to get her back in the water. Bail has been set for each of the ne'er do wells @ $1MM each. Larry Telford Carpe Diem 1985 Royal Star 42 Emery Cove YH San Francisco Bay

We also estimate the current speed by subtracting 'how fast we should be going' at a certain RPM but once in a while we put it in neutral and let the current take control and see what the GPS says our SOG is. I have never seen more than 3 knots.

Do not go to Stuart Boat Yard with Greg unless you want to work with no estimate and be surprised. Sent from my iPhone > On Apr 25, 2015, at 1:19 PM, Jonas via Trawlers-and-Trawlering wrote: > > I am in the Stuart Fl. area with an insurance survey looming. Need some blister repair and bottom painting done as well.